[PATCH v2 2/2] arm64: dts: imx8qxp: add adma_pwm in adma

[Shawn Guo]

On Mon, Apr 24, 2023 at 10:21:08AM +0200, Alexander Stein wrote:
> Add PWM device and the corresponding clock gating device in adma subsystem.
> 
> Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>

Looks good to me.  I will pick it up after dt-bindings one gets
accepted/picked first.

Shawn

> ---
> * New in v2
> 
>  .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 25 +++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> index 2dce8f2ee3ea..7d5f96c99020 100644
> --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> @@ -124,6 +124,19 @@ lpuart3: serial at 5a090000 {
>  		status = "disabled";
>  	};
>  
> +	adma_pwm: pwm at 5a190000 {
> +		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
> +		reg = <0x5a190000 0x1000>;
> +		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&adma_pwm_lpcg 1>,
> +			 <&adma_pwm_lpcg 0>;
> +		clock-names = "ipg", "per";
> +		assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>;
> +		assigned-clock-rates = <24000000>;
> +		#pwm-cells = <2>;
> +		power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
> +	};
> +
>  	spi0_lpcg: clock-controller at 5a400000 {
>  		compatible = "fsl,imx8qxp-lpcg";
>  		reg = <0x5a400000 0x10000>;
> @@ -220,6 +233,18 @@ uart3_lpcg: clock-controller at 5a490000 {
>  		power-domains = <&pd IMX_SC_R_UART_3>;
>  	};
>  
> +	adma_pwm_lpcg: clock-controller at 5a590000 {
> +		compatible = "fsl,imx8qxp-lpcg";
> +		reg = <0x5a590000 0x10000>;
> +		#clock-cells = <1>;
> +		clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>,
> +			 <&dma_ipg_clk>;
> +		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> +		clock-output-names = "adma_pwm_lpcg_clk",
> +				     "adma_pwm_lpcg_ipg_clk";
> +		power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
> +	};
> +
>  	i2c0: i2c at 5a800000 {
>  		reg = <0x5a800000 0x4000>;
>  		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
> -- 
> 2.34.1
>