[PATCH net-next 24/30] net: dsa: mt7530: rename MT7530_MFC to MT753X_MFC

[Arınç ÜNAL]

On 26.05.2023 18:50, Russell King (Oracle) wrote:
> On Fri, May 26, 2023 at 06:42:58PM +0300, Vladimir Oltean wrote:
>> On Mon, May 22, 2023 at 03:15:26PM +0300, arinc9.unal at gmail.com wrote:
>>>   	/* Disable flooding on all ports */
>>> -	mt7530_clear(priv, MT7530_MFC, BC_FFP_MASK | UNM_FFP_MASK |
>>> -		     UNU_FFP_MASK);
>>> +	mt7530_clear(priv, MT753X_MFC, MT753X_BC_FFP_MASK | MT753X_UNM_FFP_MASK
>>> +		     | MT753X_UNU_FFP_MASK);
>>
>> The preferred coding style is not to start new lines with operators.
>>
>>> +/* Register for CPU forward control */
>>>   #define MT7531_CFC			0x4
>>>   #define  MT7531_MIRROR_EN		BIT(19)
>>> -#define  MT7531_MIRROR_MASK		(MIRROR_MASK << 16)
>>> -#define  MT7531_MIRROR_PORT_GET(x)	(((x) >> 16) & MIRROR_MASK)
>>> -#define  MT7531_MIRROR_PORT_SET(x)	(((x) & MIRROR_MASK) << 16)
>>> +#define  MT7531_MIRROR_MASK		(0x7 << 16)
>>
>> minor nitpick: if you express this as GENMASK(18, 16), it will be a bit
>> easier to cross-check with the datasheet, since both 18 and 16 are more
>> representative than 0x7.
>>
>>> +#define  MT7531_MIRROR_PORT_GET(x)	(((x) >> 16) & 0x7)
>>
>> also here: (((x) & GENMASK(18, 16)) >> 16)
> 
> Even better are:
> #define  MT7531_MIRROR_PORT_GET(x)	FIELD_GET(MT7531_MIRROR_MASK, x)
> 
>>
>>> +#define  MT7531_MIRROR_PORT_SET(x)	(((x) & 0x7) << 16)
>>
>> and here: (((x) << 16) & GENMASK(18, 16))
> 
> #define  MT7531_MIRROR_PORT_SET(x)	FIELD_PREP(MT7531_MIRROR_MASK, x)
> 
> No need to add parens around "x" in either of these uses as we're not
> doing anything with x other than passing it into another macro.

Thanks. I suppose the GENMASK, FIELD_PREP, and FIELD_GET macros can be 
widely used on mt7530.h? Like GENMASK(2, 0) on MT7530_MIRROR_MASK and 
FIELD_PREP(MT7530_MIRROR_MASK, x) on MT7530_MIRROR_PORT(x)?

Arınç