[PATCH v3 0/8] RK3588 ADC support
andy.shevchenko at gmail.com
andy.shevchenko at gmail.com
Sat Jun 3 13:50:09 PDT 2023
Sun, Jun 04, 2023 at 12:23:32AM +0530, Shreeya Patel kirjoitti:
> This patch series adds ADC support for RK3588 and updates
> the DT bindings for the same.
>
> To test ADC support on Rock 5B board, a voltage divider circuit
> was created using the gpio pin 22 ( SARADC_IN4 ) and few more
> tests were ran for testing the buffer and trigger support using
> the iio_generic_buffer tool.
Well done!
For patches 1-6
Reviewed-by: Andy Shevchenko <andy.shevchenko at gmail.com>
(with one nit-pick to be addressed)
> Changes in v3
> - Add bitfield.h header file in patch 2.
> - Add a Reviewed-by tag in patch 2.
> - Do not remove clock enabling and disabling from the suspend and
> resume functions respectively in patch 3
>
> Changes in v2
> - Add from address in patches 1 and 2.
> - Create separate patches for adding new device support and changes to
> the old device code.
> - Make use of FIELD_PREP in patch 2.
> - Move the enablement of clocks at it's original position in patch 3
> - Add Reviewed-by tag in patches 4 and 5.
> - Add an Acked-by tag in patch 8.
>
> Shreeya Patel (8):
> iio: adc: rockchip_saradc: Add callback functions
> iio: adc: rockchip_saradc: Add support for RK3588
> iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled
> iio: adc: rockchip_saradc: Use of_device_get_match_data
> iio: adc: rockchip_saradc: Match alignment with open parenthesis
> iio: adc: rockchip_saradc: Use dev_err_probe
> arm64: dts: rockchip: Add DT node for ADC support in RK3588
> dt-bindings: iio: adc: Add rockchip,rk3588-saradc string
>
> .../bindings/iio/adc/rockchip-saradc.yaml | 1 +
> arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 12 +
> drivers/iio/adc/rockchip_saradc.c | 246 +++++++++++-------
> 3 files changed, 168 insertions(+), 91 deletions(-)
>
> --
> 2.30.2
>
--
With Best Regards,
Andy Shevchenko
More information about the linux-arm-kernel
mailing list