[PATCH v3 0/8] RK3588 ADC support

[Shreeya Patel]

This patch series adds ADC support for RK3588 and updates
the DT bindings for the same.

To test ADC support on Rock 5B board, a voltage divider circuit
was created using the gpio pin 22 ( SARADC_IN4 ) and few more
tests were ran for testing the buffer and trigger support using
the iio_generic_buffer tool.

Changes in v3
  - Add bitfield.h header file in patch 2.
  - Add a Reviewed-by tag in patch 2.
  - Do not remove clock enabling and disabling from the suspend and
    resume functions respectively in patch 3

Changes in v2
  - Add from address in patches 1 and 2.
  - Create separate patches for adding new device support and changes to
    the old device code.
  - Make use of FIELD_PREP in patch 2.
  - Move the enablement of clocks at it's original position in patch 3
  - Add Reviewed-by tag in patches 4 and 5.
  - Add an Acked-by tag in patch 8.

Shreeya Patel (8):
  iio: adc: rockchip_saradc: Add callback functions
  iio: adc: rockchip_saradc: Add support for RK3588
  iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled
  iio: adc: rockchip_saradc: Use of_device_get_match_data
  iio: adc: rockchip_saradc: Match alignment with open parenthesis
  iio: adc: rockchip_saradc: Use dev_err_probe
  arm64: dts: rockchip: Add DT node for ADC support in RK3588
  dt-bindings: iio: adc: Add rockchip,rk3588-saradc string

 .../bindings/iio/adc/rockchip-saradc.yaml     |   1 +
 arch/arm64/boot/dts/rockchip/rk3588s.dtsi     |  12 +
 drivers/iio/adc/rockchip_saradc.c             | 246 +++++++++++-------
 3 files changed, 168 insertions(+), 91 deletions(-)

-- 
2.30.2