[PATCH 10/12] arm64: dts: ti: k3-am65-iot*: Fixup reference to phandles array

[Jan Kiszka]

On 01.06.23 17:26, Nishanth Menon wrote:
> When referring to array of phandles, using <> to separate the array
> entries is better notation as it makes potential errors with phandle and
> cell arguments easier to catch. Fix the outliers to be consistent with
> the rest of the usage.
> 
> Cc: Jan Kiszka <jan.kiszka at siemens.com>
> Signed-off-by: Nishanth Menon <nm at ti.com>
> ---
>  .../boot/dts/ti/k3-am65-iot2050-common.dtsi    | 17 ++++++++---------
>  .../dts/ti/k3-am6548-iot2050-advanced-m2.dts   | 18 ++++++++----------
>  2 files changed, 16 insertions(+), 19 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> index 6b052a0ecfa1..bbbb5c169ccc 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> @@ -384,13 +384,12 @@ &main_gpio0 {
>  
>  &wkup_gpio0 {
>  	pinctrl-names = "default";
> -	pinctrl-0 = <
> -		&arduino_io_d2_to_d3_pins_default
> -		&arduino_i2c_aio_switch_pins_default
> -		&arduino_io_oe_pins_default
> -		&push_button_pins_default
> -		&db9_com_mode_pins_default
> -	>;
> +	pinctrl-0 =
> +		<&arduino_io_d2_to_d3_pins_default>,
> +		<&arduino_i2c_aio_switch_pins_default>,
> +		<&arduino_io_oe_pins_default>,
> +		<&push_button_pins_default>,
> +		<&db9_com_mode_pins_default>;
>  	gpio-line-names =
>  		/* 0..9 */
>  		"wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0",
> @@ -711,11 +710,11 @@ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
>  &mcu_r5fss0_core0 {
>  	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
>  			<&mcu_r5fss0_core0_memory_region>;
> -	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
> +	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
>  };
>  
>  &mcu_r5fss0_core1 {
>  	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
>  			<&mcu_r5fss0_core1_memory_region>;
> -	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
> +	mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
>  };
> diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
> index d5e41bdc89c3..1fc93e0b3c9b 100644
> --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
> @@ -66,20 +66,18 @@ AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7)  /* (C23) GPIO1_89 */
>  
>  &main_gpio0 {
>  	pinctrl-names = "default";
> -	pinctrl-0 = <
> -		&main_m2_pcie_mux_control
> -		&arduino_io_d4_to_d9_pins_default
> -	>;
> +	pinctrl-0 =
> +		<&main_m2_pcie_mux_control>,
> +		<&arduino_io_d4_to_d9_pins_default>;
>  };
>  
>  &main_gpio1 {
>  	pinctrl-names = "default";
> -	pinctrl-0 = <
> -		&main_m2_enable_pins_default
> -		&main_pmx0_m2_config_pins_default
> -		&main_pmx1_m2_config_pins_default
> -		&cp2102n_reset_pin_default
> -	>;
> +	pinctrl-0 =
> +		<&main_m2_enable_pins_default>,
> +		<&main_pmx0_m2_config_pins_default>,
> +		<&main_pmx1_m2_config_pins_default>,
> +		<&cp2102n_reset_pin_default>;
>  };
>  
>  /*

Reviewed-by: Jan Kiszka <jan.kiszka at siemens.com>

Jan

-- 
Siemens AG, Technology
Competence Center Embedded Linux