[PATCH 3/3] clk: imx: imx6sx: Remove hardcoded LCDIF1 parent

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

It is not a good idea to hardcode the LCDIF1 parent inside the
clock driver because some users may want to use a different clock
parent for LCDIF1. One of the reasons could be related to EMI tests.

Remove the harcoded LCDIF1 parent as this is better described via
devicetree.

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 drivers/clk/imx/clk-imx6sx.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/clk/imx/clk-imx6sx.c b/drivers/clk/imx/clk-imx6sx.c
index 3f1502933e59..b110258b9036 100644
--- a/drivers/clk/imx/clk-imx6sx.c
+++ b/drivers/clk/imx/clk-imx6sx.c
@@ -498,10 +498,6 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	clk_set_parent(hws[IMX6SX_CLK_EIM_SLOW_SEL]->clk, hws[IMX6SX_CLK_PLL2_PFD2]->clk);
 	clk_set_rate(hws[IMX6SX_CLK_EIM_SLOW]->clk, 132000000);
 
-	/* set parent clock for LCDIF1 pixel clock */
-	clk_set_parent(hws[IMX6SX_CLK_LCDIF1_PRE_SEL]->clk, hws[IMX6SX_CLK_PLL5_VIDEO_DIV]->clk);
-	clk_set_parent(hws[IMX6SX_CLK_LCDIF1_SEL]->clk, hws[IMX6SX_CLK_LCDIF1_PODF]->clk);
-
 	/* Set the parent clks of PCIe lvds1 and pcie_axi to be pcie ref, axi */
 	if (clk_set_parent(hws[IMX6SX_CLK_LVDS1_SEL]->clk, hws[IMX6SX_CLK_PCIE_REF_125M]->clk))
 		pr_err("Failed to set pcie bus parent clk.\n");
-- 
2.34.1