[RFC PATCH] coresight: etm4x: Match all ETM4 instances based on DEVARCH and DEVTYPE

[Suzuki K Poulose]

On 01/06/2023 16:59, Mike Leach wrote:
> HI Suzuki,
> 
> On Thu, 25 May 2023 at 10:58, Suzuki K Poulose <suzuki.poulose at arm.com> wrote:
>>
>> All,
>>
>> This is an RFC patch to allow all ETM4 instances to be detected via AMBA driver
>> without having to add the PIDs to the list. The AMBA driver already supports
>> checking the DEVTYPE and DEVARCH registers for CoreSight components. This patch
>> adds a pid,mask value that is bound to match all PIDs (with PIDR2.JEDEC field
>> mandated to be RA0).
>>
>> With this patch, we wouldn't need to add the PIDs for newer CPUs to be able to
>> use them. An entry in the device tree is all we need. The only side effect of
>> this patch is :
>>      If a DT description exists for an ETM and the CPU ETM has an erratum, the
>>      driver may still probe it and use it. But then the DT shouldn't have
>>      described it in the first place.
>>
> 
> Don't think this is an issue.
> 
> In the previous mechanism, with an ETM with an erratum - or indeed
> need of some arch specific extension as we allow now - someone would
> have added the PID - tested it, hit the erratum, and would have to
> investigate and fix according to what is required. This changes
> nothing in terms of handling errata on ETM hardware - it just removes
> the add PID step.
> 
> For new ETM that work out of the box, this saves time re-spinning the
> driver every time - which is kind of what we want from device tree!
> 
> I'd go for it.
> 
> Moreover, the same principle could be added to the CTI drivers -
> though these are generally pretty standard anyway (i.e. based on
> Coresight Soc 600/400), so may be no pressing need for this right now.
> 

Thank you Mike, I will send it as a proper patch.

Cheers
Suzuki