[PATCH v2 3/4] dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Fri Jun 2 07:53:59 PDT 2023


On 24/05/2023 14:35, Claudiu Beznea wrote:
> Convert Atmel SAMA5D2 shutdown controller to YAML. SAMA7G5 SHDWC DT node
> (available in arch/arm/boot/dts/sama7g5.dtsi) has syscon along with its
> compatible. There is no usage of this syscon in the current code but it
> may be necessary in future as some registers of SHDWC are accessed in
> different drivers (at91-sama5d2_shdwc.c and arch/arm/mach-at91/pm.c).
> Thus update the YAML with it to make DT checkers happy.
> 



> +---
> +$id: http://devicetree.org/schemas/power/reset/atmel,sama5d2-shdwc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Atmel SAMA5D2 SHDWC Shutdown Controller
> +
> +maintainers:
> +  - Claudiu Beznea <claudiu.beznea at microchip.com>
> +
> +description:
> +  Atmel SHDWC shutdown controller controls the power supplies VDDIO and VDDCORE
> +  and the wake-up detection on debounced input lines.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - const: microchip,sama7g5-shdwc
> +          - const: syscon
> +      - items:

These are not items, but just enum. This could not work as intended.

> +          enum:
> +            - atmel,sama5d2-shdwc
> +            - microchip,sam9x60-shdwc
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +  debounce-delay-us:
> +    description:
> +      Minimum wake-up inputs debouncer period in microseconds. It is usually a
> +      board-related property.
> +
> +  atmel,wakeup-rtc-timer:
> +    description: enable real-time clock wake-up
> +    type: boolean
> +
> +patternProperties:
> +  "^input@[0-15]$":
> +    description:
> +      Wake-up input nodes. These are usually described in the "board" part of
> +      the Device Tree. Note also that input 0 is linked to the wake-up pin and
> +      is frequently used.
> +    type: object
> +    properties:
> +      reg:
> +        description: contains the wake-up input index
> +        minimum: 0
> +        maximum: 15
> +
> +      atmel,wakeup-active-high:
> +        description:
> +          The corresponding wake-up input described by the child forces the
> +          wake-up of the core power supply on a high level. The default is to
> +          be active low.
> +        type: boolean
> +
> +    required:
> +      - reg
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - microchip,sam9x60-shdwc
> +              - microchip,sama7g5-shdwc
> +    then:
> +      properties:
> +        atmel,wakeup-rtt-timer:
> +          description: enable real-time timer wake-up
> +          type: boolean

Don't define properties in allOf. This should be in top-level.


Missing additionalProperties: false.

Best regards,
Krzysztof




More information about the linux-arm-kernel mailing list