[PATCH v2 1/3] iio: adc: Add Allwinner D1/T113s/R329/T507 SoCs GPADC

[Andy Shevchenko]

On Fri, Jun 02, 2023 at 01:30:39AM +0300, Maksim Kiselev wrote:
> From: Maxim Kiselev <bigunclemax at gmail.com>
> 
> The General Purpose ADC (GPADC) can convert the external signal into
> a certain proportion of digital value, to realize the measurement of
> analog signal, which can be applied to power detection and key detection.
> 
> Theoretically, this ADC can support up to 16 channels. All SoCs below
> contain this GPADC IP. The only difference between them is the number
> of available channels:
> 
>  T113 - 1 channel
>  D1   - 2 channels
>  R329 - 4 channels
>  T507 - 4 channels

...

> +struct sun20i_gpadc_iio {
> +	struct regmap		*regmap;
> +	struct completion	completion;
> +	struct mutex		lock;

The locks should be explained (what are they for? what do they protect?).

> +	int			lastch;
> +};

...

> +static const struct regmap_config sun20i_gpadc_regmap_config = {
> +	.reg_bits = 32,
> +	.val_bits = 32,
> +	.reg_stride = 4,
> +	.fast_io = true,

I forgot if I asked about regmap lock do you need it?

> +};

...

> +	if (!wait_for_completion_timeout(&info->completion,
> +					 msecs_to_jiffies(100))) {

Dunno if it's better to have this parameter to be defined with self-explanatory
name.

> +		ret = -ETIMEDOUT;
> +		goto err;
> +	}

...

> +err:

err_unlock:

> +	mutex_unlock(&info->lock);
> +
> +	return ret;

...

> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		ret = sun20i_gpadc_adc_read(info, chan, val);
> +		return ret;

		return sun...;

> +	case IIO_CHAN_INFO_SCALE:
> +		/* value in mv = 1800mV / 4096 raw */
> +		*val = 1800;
> +		*val2 = 12;
> +		return IIO_VAL_FRACTIONAL_LOG2;
> +	default:
> +		return -EINVAL;
> +	}

...

> +	if (num_channels > SUN20I_GPADC_MAX_CHANNELS) {
> +		dev_err(dev, "num of channel children out of range");
> +		return -EINVAL;
> +	}

Is it really critical error?

...

> +	channels = devm_kcalloc(dev, num_channels,
> +				sizeof(*channels), GFP_KERNEL);

At least one more parameter can be located on the previous line.

> +	if (!channels)
> +		return -ENOMEM;

...

> +err_child_out:

err_put_child:

The goto labels should be self-explanatory of what to expect when goto.

> +	fwnode_handle_put(node);
> +
> +	return ret;

...

> +	ret = devm_request_irq(dev, irq, sun20i_gpadc_irq_handler,
> +			       0, dev_name(dev), info);
> +	if (ret < 0)

Here...

> +		return dev_err_probe(dev, ret,
> +				     "failed requesting irq %d\n", irq);

...

> +	ret = devm_iio_device_register(dev, indio_dev);
> +	if (ret < 0)

...and here, do the positive returned values even possible?

> +		return dev_err_probe(dev, ret,
> +				     "could not register the device\n");

...

> +	{ .compatible = "allwinner,sun20i-d1-gpadc", },

Inner comma is not needed.

-- 
With Best Regards,
Andy Shevchenko