[PATCH 3/3] ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappings

[Rafał Miłecki]

From: Rafał Miłecki <rafal at milecki.pl>

This allows setting FullMAC firmware regulatory domain.

Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
 arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 14303ab521ea..3552b6deffc2 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -137,8 +137,10 @@ bridge at 0,0,0 {
 		#size-cells = <2>;
 
 		wifi at 0,1,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
 			reg = <0x0000 0 0 0 0>;
 			ieee80211-freq-limit = <5735000 5835000>;
+			brcm,ccode-map = "JP-JP-78", "US-Q2-86";
 		};
 	};
 };
@@ -159,6 +161,19 @@ bridge at 1,1,0 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 
+			bridge at 1,0 {
+				reg = <0x800 0 0 0 0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				wifi at 0,0 {
+					compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+					reg = <0x0000 0 0 0 0>;
+					brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+				};
+			};
+
 			bridge at 1,2,2 {
 				reg = <0x1000 0 0 0 0>;
 
@@ -166,8 +181,10 @@ bridge at 1,2,2 {
 				#size-cells = <2>;
 
 				wifi at 1,4,0 {
+					compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
 					reg = <0x0000 0 0 0 0>;
 					ieee80211-freq-limit = <5170000 5730000>;
+					brcm,ccode-map = "JP-JP-78", "US-Q2-86";
 				};
 			};
 		};
-- 
2.35.3