[PATCH v6 3/3] Documentation: trace: Add documentation for Coresight Dummy Trace

[Hao Zhang]

Add documentation for Coresight Dummy Trace under trace/coresight.

Reviewed-by: Bagas Sanjaya <bagasdotme at gmail.com>
Signed-off-by: Hao Zhang <quic_hazha at quicinc.com>
---
 .../trace/coresight/coresight-dummy.rst       | 32 +++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/trace/coresight/coresight-dummy.rst

diff --git a/Documentation/trace/coresight/coresight-dummy.rst b/Documentation/trace/coresight/coresight-dummy.rst
new file mode 100644
index 000000000000..eff7c553ee6c
--- /dev/null
+++ b/Documentation/trace/coresight/coresight-dummy.rst
@@ -0,0 +1,32 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================
+Coresight Dummy Trace Module
+=============================
+
+    :Author:   Hao Zhang <quic_hazha at quicinc.com>
+    :Date:     June 2023
+
+Introduction
+------------
+
+The Coresight dummy trace module is for the specific devices that kernel don't
+have permission to access or configure, e.g., CoreSight TPDMs on Qualcomm
+platforms. For these devices, a dummy driver is needed to register them as
+Coresight devices. The module may also be used to define components that may
+not have any programming interfaces, so that paths can be created in the driver.
+It provides Coresight API for operations on dummy devices, such as enabling and
+disabling them. It also provides the Coresight dummy sink/source paths for
+debugging.
+
+Config details
+--------------
+
+There are two types of nodes, dummy sink and dummy source. These nodes
+are available at ``/sys/bus/coresight/devices``.
+
+Example output::
+
+    $ ls -l /sys/bus/coresight/devices | grep dummy
+    dummy_sink0 -> ../../../devices/platform/soc at 0/soc at 0:sink/dummy_sink0
+    dummy_source0 -> ../../../devices/platform/soc at 0/soc at 0:source/dummy_source0
-- 
2.17.1