[PATCH v2 1/2] dt-bindings: display: bridge: Add NXP i.MX93 parallel display format configuration

Ying Liu gnuiyl at gmail.com
Thu Jun 1 20:54:33 PDT 2023


On Fri, Jun 2, 2023 at 1:45 AM Krzysztof Kozlowski
<krzysztof.kozlowski at linaro.org> wrote:
>
> On 31/05/2023 11:32, Liu Ying wrote:
> > NXP i.MX93 mediamix blk-ctrl contains one DISPLAY_MUX register which
> > configures parallel display format by using the "PARALLEL_DISP_FORMAT"
> > field. Add device tree bindings for the display format configuration.
> >
> > Signed-off-by: Liu Ying <victor.liu at nxp.com>
> > ---
> > v1->v2:
> > * No change.
>
> How did you implement Rob's comment?

Should have discussed more in v1 about Rob's comment, but
let me explain why this dt-binding makes sense here:

Both i.MX8mp SoC and i.MX93 SoC media block control devices
contain a LVDS Display Bridge(LDB) child device. The i.MX93 block
control device additionally contains this PDFC child device.

LDB dt-binding [1] is written in a separate file and referenced in
i.MX8mp block control dt-binding [2].  So, for the sake of consistency,
it makes sense to keep this PDFC dt-binding and reference it
together with the LDB one [1] in i.MX93 block control dt-binding [3]
in future, doesn't it?

It seems good to have a separate PDFC dt-binding in case it can/will
be referenced by multiple parent device dt-bindings.

[1] Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
[2] Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml
[3] Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml

Regards,
Liu Ying

>
> >
> >  .../display/bridge/nxp,imx93-pdfc.yaml        | 78 +++++++++++++++++++
> >  1 file changed, 78 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/bridge/nxp,imx93-pdfc.yaml



More information about the linux-arm-kernel mailing list