[PATCH 1/7] modpost: fix section mismatch message for R_ARM_ABS32
Masahiro Yamada
masahiroy at kernel.org
Thu Jun 1 05:09:55 PDT 2023
addend_arm_rel() processes R_ARM_ABS32 in a wrong way.
Here, test code.
[test code 1]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
If you compile it with ARM versatile_defconfig, modpost will show the
symbol name, (unknown).
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> (unknown) (section: .init.data)
(You need to use GNU linker instead of LLD to reproduce it.)
If you compile it for other architectures, modpost will show the correct
symbol name.
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data)
For R_ARM_ABS32, addend_arm_rel() sets r->r_addend to a wrong value.
I just mimicked the code in arch/arm/kernel/module.c.
However, there is more difficulty for ARM.
Here, test code.
[test code 2]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
int __initdata bar;
int get_bar(void) { return bar; }
With this commit applied, modpost will show the following messages
for ARM versatile_defconfig:
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: get_bar (section: .text) -> foo (section: .init.data)
The reference from 'get_bar' to 'foo' seems wrong.
I have no solution for this because it is true in assembly level.
In the following output, relocation at 0x1c is no longer associated
with 'bar'. The two relocation entries point to the same symbol, and
the offset to 'bar' is encoded in the instruction 'r0, [r3, #4]'.
Disassembly of section .text:
00000000 <get_foo>:
0: e59f3004 ldr r3, [pc, #4] @ c <get_foo+0xc>
4: e5930000 ldr r0, [r3]
8: e12fff1e bx lr
c: 00000000 .word 0x00000000
00000010 <get_bar>:
10: e59f3004 ldr r3, [pc, #4] @ 1c <get_bar+0xc>
14: e5930004 ldr r0, [r3, #4]
18: e12fff1e bx lr
1c: 00000000 .word 0x00000000
Relocation section '.rel.text' at offset 0x244 contains 2 entries:
Offset Info Type Sym.Value Sym. Name
0000000c 00000c02 R_ARM_ABS32 00000000 .init.data
0000001c 00000c02 R_ARM_ABS32 00000000 .init.data
When find_elf_symbol() gets into a situation where relsym->st_name is
zero, there is no guarantee to get the symbol name as written in C.
I am keeping the current logic because it is useful in many architectures,
but the symbol name is not always correct depending on the optimization.
I left some comments in find_tosym().
Fixes: 56a974fa2d59 ("kbuild: make better section mismatch reports on arm")
Signed-off-by: Masahiro Yamada <masahiroy at kernel.org>
---
scripts/mod/modpost.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 7031e5da62e5..c68dad45ace2 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1094,6 +1094,10 @@ static Elf_Sym *find_tosym(struct elf_info *elf, Elf64_Sword addr,
if (relsym->st_name != 0)
return relsym;
+ /*
+ * Strive to find a better symbol name, but the resulting name may not
+ * match the symbol referenced in the original code.
+ */
relsym_secindex = get_secindex(elf, relsym);
for (sym = elf->symtab_start; sym < elf->symtab_stop; sym++) {
if (get_secindex(elf, sym) != relsym_secindex)
@@ -1276,12 +1280,14 @@ static int addend_386_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)
static int addend_arm_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)
{
unsigned int r_typ = ELF_R_TYPE(r->r_info);
+ Elf_Sym *sym = elf->symtab_start + ELF_R_SYM(r->r_info);
+ void *loc = reloc_location(elf, sechdr, r);
+ uint32_t inst;
switch (r_typ) {
case R_ARM_ABS32:
- /* From ARM ABI: (S + A) | T */
- r->r_addend = (int)(long)
- (elf->symtab_start + ELF_R_SYM(r->r_info));
+ inst = TO_NATIVE(*(uint32_t *)loc);
+ r->r_addend = inst + sym->st_value;
break;
case R_ARM_PC24:
case R_ARM_CALL:
--
2.39.2
More information about the linux-arm-kernel
mailing list