[PATCH v7 0/4] Add peripherals for J784S4

Nishanth Menon nm at ti.com
Fri Jul 28 14:12:17 PDT 2023


On 10:38-20230728, Jayesh Choudhary wrote:
> This series adds support for:
> - SERDES, WIZ DT nodes, Serdes lane control mux
> - DSS and DisplayPort-0 nodes
> 
> This support DEPENDS upon another series which was introduced as part
> of discussion in v5. That series[1] moves the ti-serdes headers file
> from bindings to "arch/arm64/boot/dts/ti". (That series is merged in
> linux-next tree)
> 
> Changelog v6->v7:
> - change compatible for scm_conf to 'simple-bus'
> - drop main_cpsw node due to driver dependency on [2]
> 
> Changelog v5->v6:
> - Change header file according to [1].
> - Add idle-state property in serdes_ln_ctrl node.
> - Fix dtbs_check warning due to clock-frequency property in serdes_refclk
>   node by disabling the node in main.dtsi and enabling it in board file
>   when the clock-frequency node is actually added.
> 
> Changelog v4->v5:
> - rebased the patches on linux-next tip.
> 
> Changelog v3->v4:
> - add reg property to serdes_ln_ctrl and fix the node name again to
>   get rid of dtbs_check error.
> - reorder reg, reg-names and ranges property for main_cpsw1.
> - correct the order for clocks in serdes_wiz nodes to fix dtbs_check
>   warnings.
> - fix indentation in reg, reg-names and clock property for dss node.
> - add comments for the reg type in dss registers.
> 
> Changelog v3->v2:
> - fix dtc warnings for 'scm_conf' and 'serdes_ln_ctrl' nodes
>   (Checked all the changes of the series with W=12 option during build)
> - added clock-frequency for serdes_refclk along with other EVM changes
>   This refclk is being used by all the instances of serdes_wiz which
>   are disabled by default. So configuring refclk when the serdes nodes
>   are used for the first time is okay.
> 
> Changelog v1->v2:
> - Moved J784S4 EVM changes together to the last patch
>   (Suggested by Andrew)
> 
> v5 patch link:
> <https://lore.kernel.org/all/20230721132029.123881-1-j-choudhary@ti.com/>
> 
> [1]: <https://lore.kernel.org/all/20230721125732.122421-1-j-choudhary@ti.com/>
> [2]: <https://lore.kernel.org/all/20230605154153.24025-1-afd@ti.com/>
> 
> Rahul T R (2):
>   arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node
>   arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0
> 

Could you enable AM69-SK as well? is there anything stopping it being part of the series?

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D



More information about the linux-arm-kernel mailing list