[PATCH 4/5] dt-bindings: opp: Convert ti-omap5-opp-supply.txt to yaml binding

Rob Herring robh at kernel.org
Wed Jul 26 10:10:56 PDT 2023


On Mon, Jul 24, 2023 at 10:39:10AM -0500, Nishanth Menon wrote:
> Rename ti-omap5-opp-supply to be bit more generic omap-opp-supply and
> convert the binding to yaml.
> 
> Signed-off-by: Nishanth Menon <nm at ti.com>
> ---
>  .../bindings/opp/ti,omap-opp-supply.yaml      | 108 ++++++++++++++++++
>  .../bindings/opp/ti-omap5-opp-supply.txt      |  63 ----------
>  2 files changed, 108 insertions(+), 63 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml
>  delete mode 100644 Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt
> 
> diff --git a/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml b/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml
> new file mode 100644
> index 000000000000..ff1b3d8fea31
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml
> @@ -0,0 +1,108 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/opp/ti,omap-opp-supply.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments OMAP compatible OPP supply description

Drop "description"

> +
> +description: |
> +  OMAP5, DRA7, and AM57 family of SoCs have Class0 AVS eFuse registers which
> +  contain data that can be used to adjust voltages programmed for some of their
> +  supplies for more efficient operation. This binding provides the information
> +  needed to read these values and use them to program the main regulator during
> +  an OPP transitions.
> +
> +  Also, some supplies may have an associated vbb-supply which is an Adaptive Body
> +  Bias regulator which much be transitioned in a specific sequence with regards
> +  to the vdd-supply and clk when making an OPP transition. By supplying two
> +  regulators to the device that will undergo OPP transitions we can make use
> +  of the multi regulator binding that is part of the OPP core described
> +  to describe both regulators needed by the platform.
> +
> +maintainers:
> +  - Nishanth Menon <nm at ti.com>
> +
> +properties:
> +  $nodename:
> +    pattern: '^opp-supply(@[0-9a-f]+)?$'
> +
> +  compatible:
> +    oneOf:
> +      - description: Basic OPP supply controlling VDD and VBB
> +        items:
> +          - const: ti,omap-opp-supply
> +      - description: OMAP5+ optimized voltages in efuse(Class 0) VDD along with
> +          VBB.
> +        items:
> +          - const: ti,omap5-opp-supply
> +      - description: OMAP5+ optimized voltages in efuse(class0) VDD but no VBB
> +        items:
> +          - const: ti,omap5-core-opp-supply
> +
> +  reg:
> +    description: Address and length of the efuse register set for the device

Drop

> +    maxItems: 1
> +
> +  ti,absolute-max-voltage-uv:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: Absolute maximum voltage for the OPP supply
> +
> +  ti,efuse-settings:
> +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +    description: An array of u32 tuple items providing information about
> +      optimized efuse configuration. Each item consists of the following
> +      voltage_in_uV - reference voltage (OPP Voltage)
> +      efuse_offset - efuse offset fromr eg where the optimized voltage is
> +        stored.
> +    items:
> +      minItems: 2
> +      maxItems: 2

Constraints on the values?

> +    minItems: 1
> +
> +required:
> +  - compatible
> +  - ti,absolute-max-voltage-uv
> +
> +allOf:
> +  - if:
> +      not:
> +        properties:
> +          compatible:
> +            contains:
> +              const: ti,omap-opp-supply
> +    then:
> +      required:
> +        - reg
> +        - ti,efuse-settings
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    opp_supply_mpu_iva_hd: opp-supply {

Drop unused labels.

> +        compatible = "ti,omap-opp-supply";
> +        ti,absolute-max-voltage-uv = <1375000>;
> +    };
> +  - |
> +    opp_supply_mpu: opp-supply at 4a003b20 {
> +        compatible = "ti,omap5-opp-supply";
> +        reg = <0x4a003b20 0x8>;
> +        ti,efuse-settings =
> +            /* uV   offset */
> +            <1060000 0x0>,
> +            <1160000 0x4>,
> +            <1210000 0x8>;
> +        ti,absolute-max-voltage-uv = <1500000>;
> +    };
> +  - |
> +    opp_supply_mpu2: opp-supply at 4a003b00 {
> +        compatible = "ti,omap5-core-opp-supply";
> +        reg = <0x4a003b00 0x8>;
> +        ti,efuse-settings =
> +            /* uV   offset */
> +            <1060000 0x0>,
> +            <1160000 0x4>,
> +            <1210000 0x8>;
> +        ti,absolute-max-voltage-uv = <1500000>;
> +    };

The 3rd example doesn't add anything. It's just different values.

Rob



More information about the linux-arm-kernel mailing list