[PATCH -next] i2c: s3c2410: Remove redundant dev_err()

[Ruan Jinjie]

There is no need to call the dev_err() function directly to print a custom
message when handling an error from platform_get_irq() function as
it is going to display an appropriate error message in case of a failure.

Signed-off-by: Ruan Jinjie <ruanjinjie at huawei.com>
---
 drivers/i2c/busses/i2c-s3c2410.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 28f0e5c64f32..703a43446eaa 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1076,7 +1076,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	if (!(i2c->quirks & QUIRK_POLL)) {
 		i2c->irq = ret = platform_get_irq(pdev, 0);
 		if (ret < 0) {
-			dev_err(&pdev->dev, "cannot find IRQ\n");
 			clk_unprepare(i2c->clk);
 			return ret;
 		}
-- 
2.34.1