[PATCH] arm64: dts: ti: k3-am62a7-sk: Enable dual role support for Type-C port

[Ravi Gunasekaran]

On 7/24/2023 7:27 PM, Krzysztof Kozlowski wrote:
> On 24/07/2023 13:51, Ravi Gunasekaran wrote:
>> USB0 is interfaced with a Type-C DRP connector and is managed via a
>> USB PD controller. Add support for the Type-C port with dual data
>> and power sink role.
>>
>> Signed-off-by: Ravi Gunasekaran <r-gunasekaran at ti.com>
>> ---
>>  arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 33 +++++++++++++++++++++++++
>>  1 file changed, 33 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
>> index d2cca6182738..b478b794de00 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
>> @@ -226,6 +226,24 @@
>>  	pinctrl-names = "default";
>>  	pinctrl-0 = <&main_i2c0_pins_default>;
>>  	clock-frequency = <400000>;
>> +
>> +	typec_pd0:tps6598x at 3f {

Thanks for reviewing the patch.

> Missing space after:

I will fix this in v2.

>
> Node names should be generic. See also an explanation and list of
> examples (not exhaustive) in DT specification:
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

Thanks for pointing to the section. I checked it and also few other node names
in the existing DTs.
TPS6598 is a USB Type C and Power Delivery Controller. So does a node name
"type-c-pd-controller" sound fine?

>
> Best regards,
> Krzysztof
>

Regards,
Ravi