[PATCH v5 2/2] arm64: dts: exynos: add pwm node for exynosautov9-sadk

[Jaewon Kim]

Add pwm node to support fan on exynosautov9-sadk board.
PWM channel 3 of ExynosAutov9 is connected to fan for SoC cooling
in SADK board.

Signed-off-by: Jaewon Kim <jaewon02.kim at samsung.com>
---
 arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts |  6 ++++++
 arch/arm64/boot/dts/exynos/exynosautov9.dtsi     | 10 ++++++++++
 2 files changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
index 101f51bf565a..bc1815f6ada2 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
+++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
@@ -49,6 +49,12 @@
 	};
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_tout3>;
+	status = "okay";
+};
+
 &serial_0 {
 	pinctrl-0 = <&uart0_bus_dual>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
index d3c5cdeff47f..3b906f4db907 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -1560,6 +1560,16 @@
 			samsung,syscon-phandle = <&pmu_system_controller>;
 			samsung,cluster-index = <1>;
 		};
+
+		pwm: pwm at 103f0000 {
+			compatible = "samsung,exynosautov9-pwm",
+				     "samsung,exynos4210-pwm";
+			reg = <0x103f0000 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&xtcxo>;
+			clock-names = "timers";
+		};
 	};
 };
 
-- 
2.17.1