[PATCH v7 0/7] Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ

Alexander Stein alexander.stein at ew.tq-group.com
Mon Jul 17 02:32:12 PDT 2023


Hi Sandor,

Am Montag, 17. Juli 2023, 10:03:46 CEST schrieb Sandor Yu:
> The patch set initial support Cadence MHDP8501(HDMI/DP) DRM bridge
> drivers and Cadence HDP-TX PHY(HDMI/DP) drivers for Freescale i.MX8MQ.
> 
> The patch set compose of DRM bridge drivers and PHY drivers.
> 
> Both of them need the followed two patches to pass build.
>   drm: bridge: Cadence: convert mailbox functions to macro functions
>   phy: Add HDMI configuration options
> 
> DRM bridges driver patches:
>   dt-bindings: display: bridge: Add Cadence MHDP850
>   drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver
> 
> PHY driver patches:
>   dt-bindings: phy: Add Freescale iMX8MQ DP and HDMI PHY
>   phy: freescale: Add DisplayPort PHY driver for i.MX8MQ
>   phy: freescale: Add HDMI PHY driver for i.MX8MQ
> 
> v6->v7:
> MHDP8501 HDMI/DP:
> - Combine HDMI and DP driver into one mhdp8501 driver.
>   Use the connector type to load the corresponding functions.
> - Remove connector init functions.
> - Add <linux/hdmi.h> in phy_hdmi.h to reuse ‘enum hdmi_colorspace’.

Thanks for the update. This still works as before on my TQMa8Mx/MBa8Mx 
platform using HDMI output. I only had to address the compatible for the 
combined driver.

Tested-by: Alexander Stein <alexander.stein at ew.tq-group.com>

> HDMI/DP PHY:
> - Lowercase hex values
> - Fix parameters indent issue on some functions
> - Replace ‘udelay’ with ‘usleep_range’
> 
> v5->v6:
> HDMI/DP bridge driver
> - 8501 is the part number of Cadence MHDP on i.MX8MQ.
>   Use MHDP8501 to name hdmi/dp drivers and files.
> - Add compatible "fsl,imx8mq-mhdp8501-dp" for i.MX8MQ DP driver
> - Add compatible "fsl,imx8mq-mhdp8501-hdmi" for i.MX8MQ HDMI driver
> - Combine HDMI and DP dt-bindings into one file cdns,mhdp8501.yaml
> - Fix HDMI scrambling is not enable issue when driver working in 4Kp60
>   mode.
> - Add HDMI/DP PHY API mailbox protect.
> 
> HDMI/DP PHY driver:
> - Rename DP and HDMI PHY files and move to folder phy/freescale/
> - Remove properties num_lanes and link_rate from DP PHY driver.
> - Combine HDMI and DP dt-bindings into one file fsl,imx8mq-dp-hdmi-phy.yaml
> - Update compatible string to "fsl,imx8mq-dp-phy".
> - Update compatible string to "fsl,imx8mq-hdmi-phy".
> 
> v4->v5:
> - Drop "clk" suffix in clock name.
> - Add output port property in the example of hdmi/dp.
> 
> v3->v4:
> dt-bindings:
> - Correct dt-bindings coding style and address review comments.
> - Add apb_clk description.
> - Add output port for HDMI/DP connector
> PHY:
> - Alphabetically sorted in Kconfig and Makefile for DP and HDMI PHY
> - Remove unused registers define from HDMI and DP PHY drivers.
> - More description in phy_hdmi.h.
> - Add apb_clk to HDMI and DP phy driver.
> HDMI/DP:
> - Use get_unaligned_le32() to replace hardcode type conversion
>   in HDMI AVI infoframe data fill function.
> - Add mailbox mutex lock in HDMI/DP driver for phy functions
>   to reslove race conditions between HDMI/DP and PHY drivers.
> - Add apb_clk to both HDMI and DP driver.
> - Rename some function names and add prefix with "cdns_hdmi/cdns_dp".
> - Remove bpc 12 and 16 optional that not supported.
> 
> v2->v3:
> Address comments for dt-bindings files.
> - Correct dts-bindings file names
>   Rename phy-cadence-hdptx-dp.yaml to cdns,mhdp-imx8mq-dp.yaml
>   Rename phy-cadence-hdptx-hdmi.yaml to cdns,mhdp-imx8mq-hdmi.yaml
> - Drop redundant words and descriptions.
> - Correct hdmi/dp node name.
> 
> v2 is a completely different version compared to v1.
> Previous v1 can be available here [1].
> 
> v1->v2:
> - Reuse Cadence mailbox access functions from mhdp8546 instead of
>   rockchip DP.
> - Mailbox access functions be convert to marco functions
>   that will be referenced by HDP-TX PHY(HDMI/DP) driver too.
> - Plain bridge instead of component driver.
> - Standalone Cadence HDP-TX PHY(HDMI/DP) driver.
> - Audio driver are removed from the patch set, it will be add in another
>   patch set later.
> 
> [1]
> https://patchwork.kernel.org/project/linux-rockchip/cover/cover.1590982881.
> git.Sandor.yu at nxp.com/
> 
> Sandor Yu (7):
>   drm: bridge: Cadence: convert mailbox functions to macro functions
>   phy: Add HDMI configuration options
>   dt-bindings: display: bridge: Add Cadence MHDP850
>   drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver
>   dt-bindings: phy: Add Freescale iMX8MQ DP and HDMI PHY
>   phy: freescale: Add DisplayPort PHY driver for i.MX8MQ
>   phy: freescale: Add HDMI PHY driver for i.MX8MQ
> 
>  .../display/bridge/cdns,mhdp8501.yaml         | 105 ++
>  .../bindings/phy/fsl,imx8mq-dp-hdmi-phy.yaml  |  53 +
>  drivers/gpu/drm/bridge/cadence/Kconfig        |  15 +
>  drivers/gpu/drm/bridge/cadence/Makefile       |   2 +
>  .../drm/bridge/cadence/cdns-mhdp8501-core.c   | 313 ++++++
>  .../drm/bridge/cadence/cdns-mhdp8501-core.h   | 410 ++++++++
>  .../gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c | 780 +++++++++++++++
>  .../drm/bridge/cadence/cdns-mhdp8501-hdmi.c   | 674 +++++++++++++
>  .../drm/bridge/cadence/cdns-mhdp8546-core.c   | 195 +---
>  .../drm/bridge/cadence/cdns-mhdp8546-core.h   |   1 -
>  drivers/phy/freescale/Kconfig                 |  18 +
>  drivers/phy/freescale/Makefile                |   2 +
>  drivers/phy/freescale/phy-fsl-imx8mq-dp.c     | 698 ++++++++++++++
>  drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c   | 907 ++++++++++++++++++
>  include/drm/bridge/cdns-mhdp-mailbox.h        | 240 +++++
>  include/linux/phy/phy-hdmi.h                  |  24 +
>  include/linux/phy/phy.h                       |   7 +-
>  17 files changed, 4248 insertions(+), 196 deletions(-)
>  create mode 100644
> Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml create
> mode 100644
> Documentation/devicetree/bindings/phy/fsl,imx8mq-dp-hdmi-phy.yaml create
> mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.c create mode
> 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.h create mode
> 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c create mode 100644
> drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-hdmi.c create mode 100644
> drivers/phy/freescale/phy-fsl-imx8mq-dp.c
>  create mode 100644 drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c
>  create mode 100644 include/drm/bridge/cdns-mhdp-mailbox.h
>  create mode 100644 include/linux/phy/phy-hdmi.h


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/





More information about the linux-arm-kernel mailing list