[PATCH] arm64: dts: imx8mm: add imx8mm-venice-gw73xx-0x-rpidsi overlay for display

Shawn Guo shawnguo at kernel.org
Sun Jul 16 17:46:38 PDT 2023


On Fri, Jun 09, 2023 at 03:55:52PM -0700, Tim Harvey wrote:
> Add support for the following Raspberry Pi displays:
>  - DFROBOT DRF0678 7in 800x480 TFT DSI capacitive touch
>  - DFROBOT DRF0550 5in 800x480 TFT DSI capacitive touch
> 
> Both have the following hardware:
>  - FocalTech FT5406 10pt touch controller (with no interrupt)
>  - Powertip PH800480T013-IDF02 compatible panel
>  - Toshiba TC358762 compatible DSI to DBI bridge
>  - ATTINY based regulator used for backlight controller and panel enable
> 
> Support is added via a device-tree overlay. The touch controller is not
> yet supported as polling mode is needed.
> 
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> ---
>  arch/arm64/boot/dts/freescale/Makefile        |  2 +
>  .../imx8mm-venice-gw73xx-0x-rpidsi.dtso       | 87 +++++++++++++++++++
>  2 files changed, 89 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rpidsi.dtso
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 76269da9cc62..48f03fc9af04 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -149,6 +149,7 @@ imx8mm-venice-gw72xx-0x-rs232-rts-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-ven
>  imx8mm-venice-gw72xx-0x-rs422-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs422.dtbo
>  imx8mm-venice-gw72xx-0x-rs485-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs485.dtbo
>  imx8mm-venice-gw73xx-0x-imx219-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo
> +imx8mm-venice-gw73xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rpidsi.dtbo
>  imx8mm-venice-gw73xx-0x-rs232-rts-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs232-rts.dtbo
>  imx8mm-venice-gw73xx-0x-rs422-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs422.dtbo
>  imx8mm-venice-gw73xx-0x-rs485-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs485.dtbo
> @@ -158,6 +159,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs232-rts.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs422.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs485.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-imx219.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rpidsi.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs232-rts.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs422.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs485.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rpidsi.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rpidsi.dtso
> new file mode 100644
> index 000000000000..45bf88fa7c16
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rpidsi.dtso
> @@ -0,0 +1,87 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2023 Gateworks Corporation
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +#include "imx8mm-pinfunc.h"
> +
> +/dts-v1/;
> +/plugin/;
> +
> +&{/} {
> +	compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
> +
> +	panel {
> +		compatible = "powertip,ph800480t013-idf02";
> +		power-supply = <&attiny>;
> +		backlight = <&attiny>;
> +
> +		port {
> +			panel_in: endpoint {
> +				remote-endpoint = <&bridge_out>;
> +			};
> +		};
> +	};
> +};
> +
> +&i2c3 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	attiny: regulator at 45 {
> +		compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
> +		reg = <0x45>;
> +	};
> +};
> +
> +&lcdif {
> +	status = "okay";
> +};
> +
> +&mipi_dsi {
> +	samsung,burst-clock-frequency = <891000000>;
> +	samsung,esc-clock-frequency = <54000000>;
> +	samsung,pll-clock-frequency = <27000000>;
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	status = "okay";
> +
> +	bridge at 0 {
> +		compatible = "toshiba,tc358762";
> +		reg = <0>;
> +		vddc-supply = <&attiny>;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port at 0 {
> +				reg = <0>;

Have a newline between properties and child node.

Shawn

> +				bridge_in: endpoint {
> +					remote-endpoint = <&dsi_out>;
> +				};
> +			};
> +
> +			port at 1 {
> +				reg = <1>;
> +				bridge_out: endpoint {
> +					remote-endpoint = <&panel_in>;
> +				};
> +			};
> +		};
> +	};
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		port at 1 {
> +			reg = <1>;
> +			dsi_out: endpoint {
> +				remote-endpoint = <&bridge_in>;
> +			};
> +		};
> +	};
> +};
> -- 
> 2.34.1
> 



More information about the linux-arm-kernel mailing list