[PATCH v3 1/8] ARM: dts: stm32: Add alternate pinmux for i2s pins

Sean Nyekjaer sean at geanix.com
Tue Jul 11 23:29:46 PDT 2023


Add another mux option for i2s pins, this is used on Octavo OSD32MP1-RED board.

Signed-off-by: Sean Nyekjaer <sean at geanix.com>
Reviewed-by: Olivier Moysan <olivier.moysan at foss.st.com>
---
 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index e86d989dd351..d79f89f37bc7 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -686,6 +686,25 @@ pins {
 		};
 	};
 
+	i2s2_pins_b: i2s2-1 {
+		pins {
+			pinmux = <STM32_PINMUX('C',  3, AF5)>, /* I2S2_SDO */
+				 <STM32_PINMUX('B', 12, AF5)>, /* I2S2_WS */
+				 <STM32_PINMUX('B', 13, AF5)>; /* I2S2_CK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	i2s2_sleep_pins_b: i2s2-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* I2S2_SDO */
+				 <STM32_PINMUX('B', 12, ANALOG)>, /* I2S2_WS */
+				 <STM32_PINMUX('B', 13, ANALOG)>; /* I2S2_CK */
+		};
+	};
+
 	ltdc_pins_a: ltdc-0 {
 		pins {
 			pinmux = <STM32_PINMUX('G',  7, AF14)>, /* LCD_CLK */
-- 
2.40.0




More information about the linux-arm-kernel mailing list