[PATCH 1/4] ARM: dts: BCM53573: Drop nonexistent "default-off" LED trigger

Rafał Miłecki zajec5 at gmail.com
Fri Jul 7 04:40:01 PDT 2023


From: Rafał Miłecki <rafal at milecki.pl>

There is no such trigger documented or implemented in Linux. It was a
copy & paste mistake.

This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: leds: led-wlan:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
        'default-off' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'none', 'torch', 'usb-gadget', 'usb-host', 'usbport']
        'default-off' does not match '^cpu[0-9]*$'
        'default-off' does not match '^hci[0-9]+-power$'
        'default-off' does not match '^mmc[0-9]+$'
        'default-off' does not match '^phy[0-9]+tx$'
        From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml

Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
 arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 1 -
 arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts  | 2 --
 2 files changed, 3 deletions(-)

diff --git a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
index 0734aa249b8e..b9dd50844419 100644
--- a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
@@ -26,7 +26,6 @@ leds {
 		led-wlan {
 			label = "bcm53xx:blue:wlan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		led-system {
diff --git a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
index e6fb6cbe6963..cb22ae2a02e5 100644
--- a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
@@ -26,7 +26,6 @@ leds-0 {
 		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		led-system {
@@ -42,7 +41,6 @@ leds-1 {
 		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 	};
 
-- 
2.35.3




More information about the linux-arm-kernel mailing list