[PATCH v1 0/2] Disable HS400 for eMMC on Radxa ROCK 4 SBCs

Folker Schwesinger dev at folker-schwesinger.de
Wed Jul 5 13:32:40 PDT 2023


Hi,

On Wed Jul 5, 2023 at 4:42 PM CEST, Christopher Obbard wrote:
> There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running
> in HS400 mode. This ends up resulting in some block errors after a while
> or after a "heavy" operation utilising the eMMC (e.g. resizing a
> filesystem). An example of these errors is as follows:
>
>     [  289.171014] mmc1: running CQE recovery
>     [  290.048972] mmc1: running CQE recovery
>     [  290.054834] mmc1: running CQE recovery
>     [  290.060817] mmc1: running CQE recovery
>     [  290.061337] blk_update_request: I/O error, dev mmcblk1, sector 1411072 op 0x1:(WRITE) flags 0x800 phys_seg 36 prio class 0
>     [  290.061370] EXT4-fs warning (device mmcblk1p1): ext4_end_bio:348: I/O error 10 writing to inode 29547 starting block 176466)
>     [  290.061484] Buffer I/O error on device mmcblk1p1, logical block 172288
>     [  290.061531] Buffer I/O error on device mmcblk1p1, logical block 172289
>     [  290.061551] Buffer I/O error on device mmcblk1p1, logical block 172290
>     [  290.061574] Buffer I/O error on device mmcblk1p1, logical block 172291
>     [  290.061592] Buffer I/O error on device mmcblk1p1, logical block 172292
>     [  290.061615] Buffer I/O error on device mmcblk1p1, logical block 172293
>     [  290.061632] Buffer I/O error on device mmcblk1p1, logical block 172294
>     [  290.061654] Buffer I/O error on device mmcblk1p1, logical block 172295
>     [  290.061673] Buffer I/O error on device mmcblk1p1, logical block 172296
>     [  290.061695] Buffer I/O error on device mmcblk1p1, logical block 172297
>
> Disabling the Command Queue seems to stop the CQE recovery from running,
> but doesn't seem to improve the I/O errors. Until this can be investigated
> further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O
> errors from occurring.

Thanks for the patches! This issue lately got some attention on the
Radxa forums so thanks for bringing it to the kernel lists.

As a user who was hitting this issue some time ago I'd like to share the
observations I made during my testing:

I've seen these EMMC issues on several RockPi4 boards (4b v1.4, 4b v1.5,
4SE and 4b+ v1.73), with different EMMC modules (3 Foresee, 1 Samsung)
and throughout different kernels (v6.1.8 through 6.1.37, 6.3,
6.3.0-rc7-next-20230421).

However, with this vendor image [1] that uses kernel
4.4.154-116-rockchip-g86a614bc15b3 all of the EMMC modules work just fine.
The same holds true for another vendor image with kernel
4.4.154-00039-g00fccd37c63c-dirty.

The interesting thing here is, that both 4.4 kernels have HS400 enabled
(and max-frequency=<150000000> set) in their respective device-trees.
This can be checked in the vendor kernel repo for
4.4.154-116-rockchip-g86a614bc15b3 [2] and for
4.4.154-00039-g00fccd37c63c [3].

Kind regards

Folker


[1]: https://github.com/radxa-build/rock-pi-4b/releases/download/main-df04b3af/rockpi-4b-debian-buster-xfce4-arm64-20220401-0335-gpt.img.xz
[2]: https://github.com/radxa/kernel/blob/86a614bc15b3b1aeb3a9a9e395aedd088c70e35e/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
[3]: https://github.com/radxa/kernel/blob/00fccd37c63cd51b2ae9b3af965f975c561674b1/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi

>
> Christopher Obbard (2):
>   arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
>   arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
>
>  arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts | 3 +--
>  arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi   | 4 ++--
>  2 files changed, 3 insertions(+), 4 deletions(-)




More information about the linux-arm-kernel mailing list