[PATCH] dt-bindings: cleanup DTS example whitespaces

Mike Leach mike.leach at linaro.org
Mon Jul 3 02:45:50 PDT 2023


On Sun, 2 Jul 2023 at 19:23, Krzysztof Kozlowski
<krzysztof.kozlowski at linaro.org> wrote:
>
> The DTS code coding style expects spaces around '=' sign.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
>
> ---
>
> Rob,
>
> Maybe this could go via your tree? Rebased on your for-next:
> v6.4-rc2-45-gf0ac35049606
> ---
>  .../bindings/arm/arm,coresight-cti.yaml        | 18 +++++++++---------
>  .../bindings/arm/keystone/ti,sci.yaml          |  8 ++++----
>  .../devicetree/bindings/display/msm/gmu.yaml   |  2 +-
>  .../display/panel/samsung,s6e8aa0.yaml         |  2 +-
>  .../display/rockchip/rockchip-vop.yaml         |  4 ++--
>  .../bindings/iio/adc/ti,adc108s102.yaml        |  2 +-
>  .../bindings/media/renesas,rzg2l-cru.yaml      |  4 ++--
>  .../devicetree/bindings/media/renesas,vin.yaml |  4 ++--
>  .../devicetree/bindings/mtd/mtd-physmap.yaml   |  2 +-
>  .../bindings/net/mediatek-dwmac.yaml           |  2 +-
>  .../bindings/perf/amlogic,g12-ddr-pmu.yaml     |  4 ++--
>  .../bindings/phy/mediatek,dsi-phy.yaml         |  2 +-
>  .../remoteproc/amlogic,meson-mx-ao-arc.yaml    |  2 +-
>  .../devicetree/bindings/usb/mediatek,mtu3.yaml |  2 +-
>  .../devicetree/bindings/usb/ti,am62-usb.yaml   |  2 +-
>  15 files changed, 30 insertions(+), 30 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> index 0c5b875cb654..d6c84b6e7fe6 100644
> --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> @@ -287,7 +287,7 @@ examples:
>              arm,trig-in-sigs = <0 1>;
>              arm,trig-in-types = <PE_DBGTRIGGER
>                                   PE_PMUIRQ>;
> -            arm,trig-out-sigs=<0 1 2 >;
> +            arm,trig-out-sigs = <0 1 2 >;
>              arm,trig-out-types = <PE_EDBGREQ
>                                    PE_DBGRESTART
>                                    PE_CTIIRQ>;
> @@ -309,24 +309,24 @@ examples:
>
>        trig-conns at 0 {
>          reg = <0>;
> -        arm,trig-in-sigs=<0>;
> -        arm,trig-in-types=<GEN_INTREQ>;
> -        arm,trig-out-sigs=<0>;
> -        arm,trig-out-types=<GEN_HALTREQ>;
> +        arm,trig-in-sigs = <0>;
> +        arm,trig-in-types = <GEN_INTREQ>;
> +        arm,trig-out-sigs = <0>;
> +        arm,trig-out-types = <GEN_HALTREQ>;
>          arm,trig-conn-name = "sys_profiler";
>        };
>
>        trig-conns at 1 {
>          reg = <1>;
> -        arm,trig-out-sigs=<2 3>;
> -        arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
> +        arm,trig-out-sigs = <2 3>;
> +        arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>;
>          arm,trig-conn-name = "watchdog";
>        };
>
>        trig-conns at 2 {
>          reg = <2>;
> -        arm,trig-in-sigs=<1 6>;
> -        arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>;
> +        arm,trig-in-sigs = <1 6>;
> +        arm,trig-in-types = <GEN_HALTREQ GEN_RESTARTREQ>;
>          arm,trig-conn-name = "g_counter";
>        };
>      };

for above CTI chagnes

Acked-by: Mike Leach <mike.leach at linaro.org>


> diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
> index 91b96065f7df..86b59de7707e 100644
> --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
> +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
> @@ -96,8 +96,8 @@ examples:
>        compatible = "ti,k2g-sci";
>        ti,system-reboot-controller;
>        mbox-names = "rx", "tx";
> -      mboxes= <&msgmgr 5 2>,
> -              <&msgmgr 0 0>;
> +      mboxes = <&msgmgr 5 2>,
> +               <&msgmgr 0 0>;
>        reg-names = "debug_messages";
>        reg = <0x02921800 0x800>;
>      };
> @@ -107,8 +107,8 @@ examples:
>        compatible = "ti,k2g-sci";
>        ti,host-id = <12>;
>        mbox-names = "rx", "tx";
> -      mboxes= <&secure_proxy_main 11>,
> -              <&secure_proxy_main 13>;
> +      mboxes = <&secure_proxy_main 11>,
> +               <&secure_proxy_main 13>;
>        reg-names = "debug_messages";
>        reg = <0x44083000 0x1000>;
>
> diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
> index 029d72822d8b..65b02c7a1211 100644
> --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
> @@ -225,7 +225,7 @@ examples:
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
>
>      gmu: gmu at 506a000 {
> -        compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
> +        compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
>
>          reg = <0x506a000 0x30000>,
>                <0xb280000 0x10000>,
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> index 1cdc91b3439f..200fbf1c74a0 100644
> --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> @@ -74,7 +74,7 @@ examples:
>              vdd3-supply = <&vcclcd_reg>;
>              vci-supply = <&vlcd_reg>;
>              reset-gpios = <&gpy4 5 0>;
> -            power-on-delay= <50>;
> +            power-on-delay = <50>;
>              reset-delay = <100>;
>              init-delay = <100>;
>              panel-width-mm = <58>;
> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
> index 6f43d885c9b3..df61cb5f5c54 100644
> --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
> @@ -121,11 +121,11 @@ examples:
>          #size-cells = <0>;
>          vopb_out_edp: endpoint at 0 {
>            reg = <0>;
> -          remote-endpoint=<&edp_in_vopb>;
> +          remote-endpoint = <&edp_in_vopb>;
>          };
>          vopb_out_hdmi: endpoint at 1 {
>            reg = <1>;
> -          remote-endpoint=<&hdmi_in_vopb>;
> +          remote-endpoint = <&hdmi_in_vopb>;
>          };
>        };
>      };
> diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
> index 9b072b057f16..a60b1e100ee4 100644
> --- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
> @@ -35,7 +35,7 @@ unevaluatedProperties: false
>  examples:
>    - |
>      spi {
> -        #address-cells= <1>;
> +        #address-cells = <1>;
>          #size-cells = <0>;
>
>          adc at 0 {
> diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> index 7dde7967c886..1e72b8808d24 100644
> --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> @@ -137,7 +137,7 @@ examples:
>
>                  cru_parallel_in: endpoint at 0 {
>                      reg = <0>;
> -                    remote-endpoint= <&ov5642>;
> +                    remote-endpoint = <&ov5642>;
>                      hsync-active = <1>;
>                      vsync-active = <1>;
>                  };
> @@ -150,7 +150,7 @@ examples:
>
>                  cru_csi_in: endpoint at 0 {
>                      reg = <0>;
> -                    remote-endpoint= <&csi_cru_in>;
> +                    remote-endpoint = <&csi_cru_in>;
>                  };
>              };
>          };
> diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
> index 91e8f368fb52..324703bfb1bd 100644
> --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
> @@ -303,11 +303,11 @@ examples:
>
>                              vin0csi20: endpoint at 0 {
>                                      reg = <0>;
> -                                    remote-endpoint= <&csi20vin0>;
> +                                    remote-endpoint = <&csi20vin0>;
>                              };
>                              vin0csi40: endpoint at 2 {
>                                      reg = <2>;
> -                                    remote-endpoint= <&csi40vin0>;
> +                                    remote-endpoint = <&csi40vin0>;
>                              };
>                      };
>              };
> diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
> index f8c976898a95..18f6733408b4 100644
> --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
> +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
> @@ -164,7 +164,7 @@ examples:
>              reg = <0 0xf80000>;
>          };
>          firmware at f80000 {
> -            label ="firmware";
> +            label = "firmware";
>              reg = <0xf80000 0x80000>;
>              read-only;
>          };
> diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> index 0fa2132fa4f4..400aedb58205 100644
> --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> @@ -156,7 +156,7 @@ examples:
>          reg = <0x1101c000 0x1300>;
>          interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
>          interrupt-names = "macirq";
> -        phy-mode ="rgmii-rxid";
> +        phy-mode = "rgmii-rxid";
>          mac-address = [00 55 7b b5 7d f7];
>          clock-names = "axi",
>                        "apb",
> diff --git a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
> index 50f46a6898b1..4adab0149108 100644
> --- a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
> +++ b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
> @@ -42,8 +42,8 @@ examples:
>    - |
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
>      pmu {
> -        #address-cells=<2>;
> -        #size-cells=<2>;
> +        #address-cells = <2>;
> +        #size-cells = <2>;
>
>          pmu at ff638000 {
>              compatible = "amlogic,g12a-ddr-pmu";
> diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> index 26f2b887cfc1..b8d77165c4a1 100644
> --- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> @@ -83,7 +83,7 @@ examples:
>          clocks = <&clk26m>;
>          clock-output-names = "mipi_tx0_pll";
>          drive-strength-microamp = <4000>;
> -        nvmem-cells= <&mipi_tx_calibration>;
> +        nvmem-cells = <&mipi_tx_calibration>;
>          nvmem-cell-names = "calibration-data";
>          #clock-cells = <0>;
>          #phy-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> index 3100cb870170..76e8ca44906a 100644
> --- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> @@ -75,7 +75,7 @@ additionalProperties: false
>  examples:
>    - |
>      remoteproc at 1c {
> -      compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
> +      compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
>        reg = <0x1c 0x8>, <0x38 0x8>;
>        reg-names = "remap", "cpu";
>        resets = <&media_cpu_reset>;
> diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
> index 478214ab045e..a59d91243ac8 100644
> --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
> +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
> @@ -304,7 +304,7 @@ examples:
>    # Dual role switch with type-c
>    - |
>      usb at 11201000 {
> -        compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
> +        compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3";
>          reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>;
>          reg-names = "mac", "ippc";
>          interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
> diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
> index d25fc708e32c..fec5651f5602 100644
> --- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
> +++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
> @@ -92,7 +92,7 @@ examples:
>
>          usb at 31100000 {
>            compatible = "snps,dwc3";
> -          reg =<0x00 0x31100000 0x00 0x50000>;
> +          reg = <0x00 0x31100000 0x00 0x50000>;
>            interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
>                         <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
>            interrupt-names = "host", "peripheral";
> --
> 2.34.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel



-- 
Mike Leach
Principal Engineer, ARM Ltd.
Manchester Design Centre. UK



More information about the linux-arm-kernel mailing list