[PATCH v3 1/5] meson saradc: move enums declaration before variables declaration

Jonathan Cameron Jonathan.Cameron at Huawei.com
Sun Jul 2 02:14:10 PDT 2023


On Wed, 28 Jun 2023 01:37:14 +0300
George Stark <gnstark at sberdevices.ru> wrote:

> Move enums declaration before variables declaration.
> 
This is fairly harmless, but would be nice to say 'why'.
Is this just for consistency with the rest of the driver or will
it be required after changes later in the patch set?

> Signed-off-by: George Stark <GNStark at sberdevices.ru>
> ---
>  drivers/iio/adc/meson_saradc.c | 44 +++++++++++++++++-----------------
>  1 file changed, 22 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
> index 18937a262af6..af38d95bd504 100644
> --- a/drivers/iio/adc/meson_saradc.c
> +++ b/drivers/iio/adc/meson_saradc.c
> @@ -202,6 +202,28 @@
>  	.datasheet_name = "TEMP_SENSOR",				\
>  }
>  
> +enum meson_sar_adc_avg_mode {
> +	NO_AVERAGING = 0x0,
> +	MEAN_AVERAGING = 0x1,
> +	MEDIAN_AVERAGING = 0x2,
> +};
> +
> +enum meson_sar_adc_num_samples {
> +	ONE_SAMPLE = 0x0,
> +	TWO_SAMPLES = 0x1,
> +	FOUR_SAMPLES = 0x2,
> +	EIGHT_SAMPLES = 0x3,
> +};
> +
> +enum meson_sar_adc_chan7_mux_sel {
> +	CHAN7_MUX_VSS = 0x0,
> +	CHAN7_MUX_VDD_DIV4 = 0x1,
> +	CHAN7_MUX_VDD_DIV2 = 0x2,
> +	CHAN7_MUX_VDD_MUL3_DIV4 = 0x3,
> +	CHAN7_MUX_VDD = 0x4,
> +	CHAN7_MUX_CH7_INPUT = 0x7,
> +};
> +
>  static const struct iio_chan_spec meson_sar_adc_iio_channels[] = {
>  	MESON_SAR_ADC_CHAN(0),
>  	MESON_SAR_ADC_CHAN(1),
> @@ -227,28 +249,6 @@ static const struct iio_chan_spec meson_sar_adc_and_temp_iio_channels[] = {
>  	IIO_CHAN_SOFT_TIMESTAMP(9),
>  };
>  
> -enum meson_sar_adc_avg_mode {
> -	NO_AVERAGING = 0x0,
> -	MEAN_AVERAGING = 0x1,
> -	MEDIAN_AVERAGING = 0x2,
> -};
> -
> -enum meson_sar_adc_num_samples {
> -	ONE_SAMPLE = 0x0,
> -	TWO_SAMPLES = 0x1,
> -	FOUR_SAMPLES = 0x2,
> -	EIGHT_SAMPLES = 0x3,
> -};
> -
> -enum meson_sar_adc_chan7_mux_sel {
> -	CHAN7_MUX_VSS = 0x0,
> -	CHAN7_MUX_VDD_DIV4 = 0x1,
> -	CHAN7_MUX_VDD_DIV2 = 0x2,
> -	CHAN7_MUX_VDD_MUL3_DIV4 = 0x3,
> -	CHAN7_MUX_VDD = 0x4,
> -	CHAN7_MUX_CH7_INPUT = 0x7,
> -};
> -
>  struct meson_sar_adc_param {
>  	bool					has_bl30_integration;
>  	unsigned long				clock_rate;




More information about the linux-arm-kernel mailing list