[PATCH v3 1/2] drm/panel: boe-tv101wum-nl6: Remove extra delay

[xinlei.lee at mediatek.com]

From: Xinlei Lee <xinlei.lee at mediatek.com>

Reduce the delay after LCM reset by removing an extra delay in the
initialization commands array. The required delay of at least 6ms after
reset is guaranteed by boe_panel_prepare().

Signed-off-by: Xinlei Lee <xinlei.lee at mediatek.com>
---
 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index 857a2f0420d7..f0093035f1ff 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -780,7 +780,6 @@ static const struct panel_init_cmd inx_hj110iz_init_cmd[] = {
 };
 
 static const struct panel_init_cmd boe_init_cmd[] = {
-	_INIT_DELAY_CMD(24),
 	_INIT_DCS_CMD(0xB0, 0x05),
 	_INIT_DCS_CMD(0xB1, 0xE5),
 	_INIT_DCS_CMD(0xB3, 0x52),
-- 
2.18.0