[GIT PULL] amlogic ARM64 DT updates for v6.3
Neil Armstrong
neil.armstrong at linaro.org
Mon Jan 30 05:46:24 PST 2023
Hi,
Here's a set of Amlogic ARM64 DT changes for v6.3.
New boards are added:
- Odroid-N2L using S922X (Smaller version of Odroid-N2+)
- BananaPi M2-Pro using S905X4 (Variant of BPI=M5 with on-board wifi)
- Radxa Zero2 using A311D (Faster version of Radza Zero)
The NNA reset & NNA power domain bindings were added to an immutable branch
and merged in this PR and the drivers DR PR to satisfy build-time
dependencies.
A cleanup & fixup of the ARM64 DT has started, first by covering easy
mistakes like invalid node names & missing unit address.
This goes along a complete migration of bindings to dt-schema, which
are merged by the respective maintainers, the migration will cover the next
Lnux versions.
In addition, the following changes are added:
- Add DT node for the VIPNano-QI on the A311D, a Neural Network variant of the Vivant GPU core
- remove CPU opps below 1GHz for G12A boards, like it was done for G12B/SM1
- Fix WiFi/Bt definition around P212 & Khadas VIM1
- Add audio node to P212
- Fix FAN trip definition to Odroid-HC4
- Fix gpio-fan gpios definition
- Permit Radxa Zero OTG on USB1
- Fix VDDIO_C enable gpio by using OPEN DRAIN flag
Neil
The following changes since commit 1b929c02afd37871d5afb9d498426f83432e71c2:
Linux 6.2-rc1 (2022-12-25 13:41:39 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git tags/amlogic-arm64-dt-for-v6.3
for you to fetch changes up to d747e7f76a5fa6e3deb4c419df768f9ee49c2161:
arm64: dts: meson: add support for Radxa Zero2 (2023-01-27 18:01:56 +0100)
----------------------------------------------------------------
Amlogic ARM64 DT changes for v6.3:
- Merge of immutable bindings branch with Reset & power domain binding
- New boards:
- Odroid-N2L (Smaller version of Odroid-N2+)
- BananaPi M2-Pro (Variant of BPI=M5 with on-board wifi)
- Radxa Zero2 (New version of Radza Zero with A311D SoC)
- Add DT node for the VIPNano-QI on the A311D
- DT bindings fixups covering all SoC families
- MAC address nodes
- ethernet PHY node name
- scpi & child node names
- SD/SDIO node name
- USB supply name
- invalid clock-names
- rng node name
- rtc node name
- ETH phy mux node name
- button & adc keys node name
- leds node names
- RK818 pmic properties
- remove CPU opps below 1GHz for G12A boards, like it was done for G12B/SM1
- Fix WiFi/Bt definition around P212 & Khadas VIM1
- Add audio node to P212
- Fix FAN trip definition to Odroid-HC4
- Fix gpio-fan gpios definition
- Permit Radxa Zero OTG on USB1
- Fix VDDIO_C enable gpio by using OPEN DRAIN flag
----------------------------------------------------------------
Christian Hewitt (12):
arm64: dts: meson: remove CPU opps below 1GHz for G12A boards
arm64: dts: meson: add Broadcom WiFi to P212 dtsi
arm64: dts: meson: move pwm_ef node in P212 dtsi
arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1
arm64: dts: meson: add audio playback to S905X-P212 dts
arm64: dts: meson: radxa-zero: allow usb otg mode
arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN
arm64: dts: meson: bananapi-m5: remove redundant status from sound node
arm64: dts: meson: bananapi-m5: convert dts to dtsi
dt-bindings: arm: amlogic: add support for BananaPi M2-Pro
arm64: dts: meson: add support for BananaPi M2-Pro
dt-bindings: arm: amlogic: add support for Radxa Zero2
David Heidelberg (1):
arm64: dts: meson-gxm-khadas-vim2: use gpio-fan matrix instead of an array
Heiner Kallweit (1):
arm64: dts: amlogic: Fix non-compliant SD/SDIO node names
Krzysztof Kozlowski (1):
arm64: dts: amlogic: align LED node names with dtschema
Martin Blumenstingl (6):
arm64: dts: meson-gxl: jethub-j80: Fix WiFi MAC address node
arm64: dts: meson-gxl: jethub-j80: Fix Bluetooth MAC node name
arm64: dts: meson-axg: jethub-j1xx: Fix MAC address node names
arm64: dts: meson-gx: Fix Ethernet MAC address unit name
arm64: dts: meson-g12a: Fix internal Ethernet PHY unit name
arm64: dts: meson-gx: Fix the SCPI DVFS node name and unit address
Neil Armstrong (19):
Merge branch 'v6.3/bindings' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into v6.3/arm64-dt
arm64: dts: amlogic: meson-gx: fix SCPI clock dvfs node name
arm64: dts: amlogic: meson-axg: fix SCPI clock dvfs node name
arm64: dts: amlogic: meson-gx: add missing SCPI sensors compatible
arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix supply name of USB controller node
arm64: dts: amlogic: meson-gxl-s905d-sml5442tw: drop invalid clock-names property
arm64: dts: amlogic: meson-gx: add missing unit address to rng node name
arm64: dts: amlogic: meson-gxl-s905w-jethome-jethub-j80: fix invalid rtc node name
arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix invalid rtc node name
arm64: dts: amlogic: meson-gxl: add missing unit address to eth-phy-mux node name
arm64: dts: amlogic: meson-gx-libretech-pc: fix update button name
arm64: dts: amlogic: meson-sm1-bananapi-m5: fix adc keys node names
arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name
arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name
arm64: dts: amlogic: meson-g12b-odroid-go-ultra: fix rk818 pmic properties
arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip
dt-bindings: arm: amlogic: document Odroid-N2L
arm64: dts: meson-g12b: move common node into new odroid.dtsi
arm64: dts: meson-g12b-odroid: Add initial support for Hardkernel ODROID-N2L
Tomeu Vizoso (3):
dt-bindings: reset: meson-g12a: Add missing NNA reset
dt-bindings: power: Add G12A NNA power domain
arm64: dts: Add DT node for the VIPNano-QI on the A311D
Yuntian Zhang (1):
arm64: dts: meson: add support for Radxa Zero2
Documentation/devicetree/bindings/arm/amlogic.yaml | 3 +
arch/arm64/boot/dts/amlogic/Makefile | 3 +
.../dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi | 10 +-
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 6 +-
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 16 +-
.../boot/dts/amlogic/meson-g12a-radxa-zero.dts | 1 -
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 20 -
.../dts/amlogic/meson-g12b-odroid-go-ultra.dts | 2 +-
.../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 448 +------------------
.../boot/dts/amlogic/meson-g12b-odroid-n2l.dts | 125 ++++++
arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi | 445 +++++++++++++++++++
.../boot/dts/amlogic/meson-g12b-radxa-zero2.dts | 489 +++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 4 +
.../boot/dts/amlogic/meson-gx-libretech-pc.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts | 2 +-
.../dts/amlogic/meson-gxl-s905d-phicomm-n1.dts | 2 +-
.../boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts | 1 -
.../amlogic/meson-gxl-s905w-jethome-jethub-j80.dts | 6 +-
.../dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 15 -
.../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 68 +++
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 21 +-
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
.../boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 9 +-
.../boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts | 97 ++++
.../boot/dts/amlogic/meson-sm1-bananapi-m5.dts | 428 +-----------------
.../arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi | 435 ++++++++++++++++++
.../boot/dts/amlogic/meson-sm1-odroid-hc4.dts | 10 +-
arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 4 +
include/dt-bindings/power/meson-g12a-power.h | 1 +
.../dt-bindings/reset/amlogic,meson-g12a-reset.h | 4 +-
31 files changed, 1746 insertions(+), 939 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
More information about the linux-arm-kernel
mailing list