[PATCH 5/7] arm64: dts: qcom: sm8450-hdk: add pmic glink node

[Neil Armstrong]

On 30/01/2023 11:40, Konrad Dybcio wrote:
> 
> 
> On 30.01.2023 10:54, Neil Armstrong wrote:
>> Add the pmic glink node linked with the DWC3 USB controller
>> switched to OTG mode and tagged with usb-role-switch.
>>
>> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
> Missing commit message

??

> 
>> ---
>>   arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 34 ++++++++++++++++++++++++++++++++-
>>   1 file changed, 33 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
>> index 5bdc2c1159ae..5ab12c911bfe 100644
>> --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
>> +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
>> @@ -87,6 +87,31 @@ lt9611_3v3: lt9611-3v3-regulator {
>>   		enable-active-high;
>>   	};
>>   
>> +	pmic-glink {
>> +		compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink";
>> +
> You could remove this newline
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		connector at 0 {
>> +			compatible = "usb-c-connector";
>> +			reg = <0>;
>> +			power-role = "dual";
>> +			data-role = "dual";
>> +
>> +			ports {
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
> And add one here
> 
>> +				port at 0 {
>> +					reg = <0>;
> And here
> 

Ack

>> +					pmic_glink_dwc3_in: endpoint {
>> +						remote-endpoint = <&usb_1_dwc3_out>;
>> +					};
>> +				};
>> +			};
>> +		};
>> +	};
>> +
>>   	vph_pwr: vph-pwr-regulator {
>>   		compatible = "regulator-fixed";
>>   		regulator-name = "vph_pwr";
>> @@ -724,7 +749,14 @@ &usb_1 {
>>   };
>>   
>>   &usb_1_dwc3 {
>> -	dr_mode = "peripheral";
>> +	dr_mode = "otg";
>> +	usb-role-switch;
>> +
>> +	port {
> Hm, maybe this could be moved to 8450 dtsi?

Nop because it depends on the board layout, I think dr_mode
and eventual connector description should really stay in
the board dts.

Thanks,
Neil

> 
> Konrad
>> +		usb_1_dwc3_out: endpoint {
>> +		      remote-endpoint = <&pmic_glink_dwc3_in>;
>> +	      };
>> +	};
>>   };
>>   
>>   &usb_1_hsphy {
>>