[PATCH 7/8] ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5250
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Fri Jan 27 11:40:56 PST 2023
The DisplayPort and MIPI phys are actually part of the Power Management
Unit system controller. They do not have their own address space, thus
keeping the nodes under soc causes warnings:
exynos5250-arndale.dtb: soc: video-phy-0: {'compatible': ['samsung,exynos5250-dp-video-phy'],
'samsung,pmu-syscon': [[20]], '#phy-cells': [[0]], 'phandle': [[24]]} should not be valid under {'type': 'object'}
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
arch/arm/boot/dts/exynos5250.dtsi | 24 +++++++++++-------------
1 file changed, 11 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 97e89859ba3d..a35c00f055a3 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -290,7 +290,7 @@ pinctrl_3: pinctrl at 3860000 {
};
pmu_system_controller: system-controller at 10040000 {
- compatible = "samsung,exynos5250-pmu", "syscon";
+ compatible = "samsung,exynos5250-pmu", "simple-mfd", "syscon";
reg = <0x10040000 0x5000>;
clock-names = "clkout16";
clocks = <&clock CLK_FIN_PLL>;
@@ -298,6 +298,16 @@ pmu_system_controller: system-controller at 10040000 {
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
+
+ dp_phy: dp-phy {
+ compatible = "samsung,exynos5250-dp-video-phy";
+ #phy-cells = <0>;
+ };
+
+ mipi_phy: mipi-phy {
+ compatible = "samsung,s5pv210-mipi-video-phy";
+ #phy-cells = <1>;
+ };
};
watchdog at 101d0000 {
@@ -810,18 +820,6 @@ mixer: mixer at 14450000 {
status = "disabled";
};
- dp_phy: video-phy-0 {
- compatible = "samsung,exynos5250-dp-video-phy";
- samsung,pmu-syscon = <&pmu_system_controller>;
- #phy-cells = <0>;
- };
-
- mipi_phy: video-phy-1 {
- compatible = "samsung,s5pv210-mipi-video-phy";
- #phy-cells = <1>;
- syscon = <&pmu_system_controller>;
- };
-
dsi_0: dsi at 14500000 {
compatible = "samsung,exynos4210-mipi-dsi";
reg = <0x14500000 0x10000>;
--
2.34.1
More information about the linux-arm-kernel
mailing list