[PATCH 02/35] Documentation: arm: correct spelling
Mukesh Ojha
quic_mojha at quicinc.com
Thu Jan 26 22:55:32 PST 2023
Hi,
Thanks for the patch.
On 1/27/2023 12:09 PM, Randy Dunlap wrote:
> Correct spelling problems for Documentation/arm/ as reported
> by codespell.
>
> Signed-off-by: Randy Dunlap <rdunlap at infradead.org>
> Cc: Russell King <linux at armlinux.org.uk>
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: Jonathan Corbet <corbet at lwn.net>
> Cc: linux-doc at vger.kernel.org
> ---
> Documentation/arm/arm.rst | 2 +-
> Documentation/arm/ixp4xx.rst | 4 ++--
> Documentation/arm/keystone/knav-qmss.rst | 2 +-
> Documentation/arm/stm32/stm32-dma-mdma-chaining.rst | 6 +++---
> Documentation/arm/sunxi/clocks.rst | 2 +-
> Documentation/arm/swp_emulation.rst | 2 +-
> Documentation/arm/tcm.rst | 2 +-
> Documentation/arm/vlocks.rst | 2 +-
> 8 files changed, 11 insertions(+), 11 deletions(-)
>
> diff -- a/Documentation/arm/ixp4xx.rst b/Documentation/arm/ixp4xx.rst
> --- a/Documentation/arm/ixp4xx.rst
> +++ b/Documentation/arm/ixp4xx.rst
> @@ -78,9 +78,9 @@ IXP4xx provides two methods of accessing
> 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
> To access PCI via this space, we simply ioremap() the BAR
> into the kernel and we can use the standard read[bwl]/write[bwl]
> - macros. This is the preffered method due to speed but it
> + macros. This is the preferred method due to speed but it
> limits the system to just 64MB of PCI memory. This can be
> - problamatic if using video cards and other memory-heavy devices.
> + problematic if using video cards and other memory-heavy devices.
>
> 2) If > 64MB of memory space is required, the IXP4xx can be
> configured to use indirect registers to access PCI This allows
> diff -- a/Documentation/arm/swp_emulation.rst b/Documentation/arm/swp_emulation.rst
> --- a/Documentation/arm/swp_emulation.rst
> +++ b/Documentation/arm/swp_emulation.rst
> @@ -1,7 +1,7 @@
> Software emulation of deprecated SWP instruction (CONFIG_SWP_EMULATE)
> ---------------------------------------------------------------------
>
> -ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommeds
> +ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommends
> moving to the load-locked/store-conditional instructions LDREX and STREX.
>
> ARMv7 multiprocessing extensions introduce the ability to disable these
> diff -- a/Documentation/arm/tcm.rst b/Documentation/arm/tcm.rst
> --- a/Documentation/arm/tcm.rst
> +++ b/Documentation/arm/tcm.rst
> @@ -71,7 +71,7 @@ in <asm/tcm.h>. Using this interface it
>
> - Have the remaining TCM RAM added to a special
> allocation pool with gen_pool_create() and gen_pool_add()
> - and provice tcm_alloc() and tcm_free() for this
> + and provide tcm_alloc() and tcm_free() for this
> memory. Such a heap is great for things like saving
> device state when shutting off device power domains.
>
> diff -- a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst b/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
> --- a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
> +++ b/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
> @@ -359,7 +359,7 @@ Driver updates for STM32 DMA-MDMA chaini
> descriptor you want a callback to be called at the end of the transfer
> (dmaengine_prep_slave_sg()) or the period (dmaengine_prep_dma_cyclic()).
> Depending on the direction, set the callback on the descriptor that finishes
> - the overal transfer:
> + the overall transfer:
>
> * DMA_DEV_TO_MEM: set the callback on the "MDMA" descriptor
> * DMA_MEM_TO_DEV: set the callback on the "DMA" descriptor
> @@ -371,7 +371,7 @@ Driver updates for STM32 DMA-MDMA chaini
> As STM32 MDMA channel transfer is triggered by STM32 DMA, you must issue
> STM32 MDMA channel before STM32 DMA channel.
>
> - If any, your callback will be called to warn you about the end of the overal
> + If any, your callback will be called to warn you about the end of the overall
> transfer or the period completion.
>
> Don't forget to terminate both channels. STM32 DMA channel is configured in
> @@ -412,4 +412,4 @@ Resources
>
> :Authors:
>
> -- Amelie Delaunay <amelie.delaunay at foss.st.com>
> \ No newline at end of file
> +- Amelie Delaunay <amelie.delaunay at foss.st.com>
> diff -- a/Documentation/arm/arm.rst b/Documentation/arm/arm.rst
> --- a/Documentation/arm/arm.rst
> +++ b/Documentation/arm/arm.rst
> @@ -141,7 +141,7 @@ ST506 hard drives
> `*configure` harddrive set to 2). I've got an internal 20MB and a great
> big external 5.25" FH 64MB drive (who could ever want more :-) ).
>
> - I've just got 240K/s off it (a dd with bs=128k); thats about half of what
> + I've just got 240K/s off it (a dd with bs=128k); that's about half of what
> RiscOS gets; but it's a heck of a lot better than the 50K/s I was getting
> last week :-)
>
> diff -- a/Documentation/arm/keystone/knav-qmss.rst b/Documentation/arm/keystone/knav-qmss.rst
> --- a/Documentation/arm/keystone/knav-qmss.rst
> +++ b/Documentation/arm/keystone/knav-qmss.rst
> @@ -39,7 +39,7 @@ CPPI/QMSS Low Level Driver document (doc
>
> git://git.ti.com/keystone-rtos/qmss-lld.git
>
> -k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator
> +k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports up to 48 accumulator
> channels. This firmware is available under ti-keystone folder of
> firmware.git at
>
> diff -- a/Documentation/arm/sunxi/clocks.rst b/Documentation/arm/sunxi/clocks.rst
> --- a/Documentation/arm/sunxi/clocks.rst
> +++ b/Documentation/arm/sunxi/clocks.rst
> @@ -5,7 +5,7 @@ Frequently asked questions about the sun
> This document contains useful bits of information that people tend to ask
> about the sunxi clock system, as well as accompanying ASCII art when adequate.
>
> -Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
> +Q: Why is the main 24MHz oscillator gateable? Wouldn't that break the
> system?
>
> A: The 24MHz oscillator allows gating to save power. Indeed, if gated
> diff -- a/Documentation/arm/vlocks.rst b/Documentation/arm/vlocks.rst
> --- a/Documentation/arm/vlocks.rst
> +++ b/Documentation/arm/vlocks.rst
> @@ -155,7 +155,7 @@ the basic algorithm:
> optimisation.
>
> If there are too many CPUs to read the currently_voting array in
> - one transaction then multiple transations are still required. The
> + one transaction then multiple transactions are still required. The
> implementation uses a simple loop of word-sized loads for this
> case. The number of transactions is still fewer than would be
> required if bytes were loaded individually.
>
Reviewed-by: Mukesh Ojha <quic_mojha at quicinc.com>
-Mukesh
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list