[PATCH v9 08/10] arm64: dts: ls1088a: Add serdes bindings

[Sean Anderson]

On 1/25/23 18:48, Shawn Guo wrote:
> On Thu, Dec 29, 2022 at 07:01:37PM -0500, Sean Anderson wrote:
>> This adds bindings for the SerDes devices. They are disabled by default
>> to prevent any breakage on existing boards.
>> 
>> Signed-off-by: Sean Anderson <sean.anderson at seco.com>
>> ---
>> 
>> (no changes since v4)
>> 
>> Changes in v4:
>> - Convert to new bindings
>> 
>> Changes in v3:
>> - New
>> 
>>  arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 18 ++++++++++++++++++
>>  1 file changed, 18 insertions(+)
>> 
>> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
>> index 260d045dbd9a..ecf9d830e36f 100644
>> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
>> @@ -238,6 +238,24 @@ reset: syscon at 1e60000 {
>>  			reg = <0x0 0x1e60000 0x0 0x10000>;
>>  		};
>>  
>> +		serdes1: serdes at 1ea0000 {
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			#clock-cells = <1>;
>> +			compatible = "fsl,ls1088a-serdes", "fsl,lynx-10g";
>> +			reg = <0x0 0x1ea0000 0x0 0x2000>;
> 
> Can we start the properties with compatible (and reg) like most of other
> device nodes?

Sure.

--Sean

>> +			status = "disabled";
>> +		};
>> +
>> +		serdes2: serdes at 1eb0000 {
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			#clock-cells = <1>;
>> +			compatible = "fsl,ls1088a-serdes", "fsl,lynx-10g";
>> +			reg = <0x0 0x1eb0000 0x0 0x2000>;
>> +			status = "disabled";
>> +		};
>> +
>>  		isc: syscon at 1f70000 {
>>  			compatible = "fsl,ls1088a-isc", "syscon";
>>  			reg = <0x0 0x1f70000 0x0 0x10000>;
>> -- 
>> 2.35.1.1320.gc452695387.dirty
>>