[PATCH] dt-bindings: usb: samsung,exynos-dwc3: allow unit address in DTS

[Krzysztof Kozlowski]

On 26/01/2023 14:41, Rob Herring wrote:
> On Thu, Jan 26, 2023 at 4:48 AM Krzysztof Kozlowski
> <krzysztof.kozlowski at linaro.org> wrote:
>>
>> On 25/01/2023 22:13, Rob Herring wrote:
>>> On Wed, Jan 25, 2023 at 06:59:43PM +0100, Krzysztof Kozlowski wrote:
>>>> The Samsung Exynos SoC USB 3.0 DWC3 Controller is a simple wrapper of
>>>> actual DWC3 Controller device node.  It handles necessary Samsung
>>>> Exynos-specific resources (regulators, clocks), but does not have its
>>>> own MMIO address space.
>>>>
>>>> However neither simple-bus bindings nor dtc W=1 accept device nodes in
>>>> soc@ node which do not have unit address.  Therefore allow using
>>>> the address space of child device (actual DWC3 Controller) as the
>>>> wrapper's address.
>>>
>>> The correct fix is 'ranges' should have a value. Though the whole
>>> wrapper thing when there are no registers I dislike...
>>
>> You mean something like this (diff against this patchset):
>> ----------
>> diff --git a/arch/arm/boot/dts/exynos54xx.dtsi
>> b/arch/arm/boot/dts/exynos54xx.dtsi
>> index 08786fd9c6ea..75b6f9678672 100644
>> --- a/arch/arm/boot/dts/exynos54xx.dtsi
>> +++ b/arch/arm/boot/dts/exynos54xx.dtsi
>> @@ -142,16 +142,15 @@ hsi2c_7: i2c at 12cd0000 {
>>                         status = "disabled";
>>                 };
>>
>> -               usbdrd3_0: usb-wrapper at 12000000 {
>> +               usbdrd3_0: usb-wrapper {
> 
> Why did you drop the unit-address? Unit-address is valid with 'reg' or 'ranges'.

I misunderstood your comment then. To which problem did you refer with
"The correct fix is ranges ...."? To my understanding this only changes
the unit address, so I won't have to change the node name
usb->usb-wrapper. Except this, my patches having empty ranges are
equivalent.


> 
>>                         compatible = "samsung,exynos5250-dwusb3";
>> -                       reg = <0x12000000 0x10000>;
>>                         #address-cells = <1>;
>>                         #size-cells = <1>;
>> -                       ranges;
>> +                       ranges = <0x0 0x12000000 0x10000>;
>>


Best regards,
Krzysztof