[PATCH v8 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
Vignesh Raghavendra
vigneshr at ti.com
Thu Jan 26 04:26:19 PST 2023
On 23/01/23 3:27 pm, Ravi Gunasekaran wrote:
> From: Aswath Govindraju <a-govindraju at ti.com>
>
> Add support for two instance of OSPI in J721S2 SoC.
>
> Signed-off-by: Aswath Govindraju <a-govindraju at ti.com>
> Signed-off-by: Matt Ranostay <mranostay at ti.com>
> Reviewed-by: Vaishnav Achath <vaishnav.a at ti.com>
> Link: https://lore.kernel.org/r/20221122101616.770050-4-mranostay@ti.com
> Signed-off-by: Ravi Gunasekaran <r-gunasekaran at ti.com>
> ---
> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 39 +++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> index 0af242aa9816..d404b595316e 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> @@ -306,4 +306,43 @@
> ti,cpts-periodic-outputs = <2>;
> };
> };
> +
> + fss: bus at 47000000 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
make dtbs W=12
Warning (unit_address_vs_reg): /bus at 100000/bus at 28380000/bus at 47000000: node has a unit name, but no reg or ranges property
> + ospi0: spi at 47040000 {
> + compatible = "ti,am654-ospi", "cdns,qspi-nor";
> + reg = <0x00 0x47040000 0x00 0x100>,
> + <0x5 0x0000000 0x1 0x0000000>;
Also, please follow existing convention
<0x05 0x00000000 0x01 0x0000000>;
> + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
> + cdns,fifo-depth = <256>;
> + cdns,fifo-width = <4>;
> + cdns,trigger-address = <0x0>;
> + clocks = <&k3_clks 109 5>;
> + assigned-clocks = <&k3_clks 109 5>;
> + assigned-clock-parents = <&k3_clks 109 7>;
> + assigned-clock-rates = <166666666>;
> + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + ospi1: spi at 47050000 {
> + compatible = "ti,am654-ospi", "cdns,qspi-nor";
> + reg = <0x00 0x47050000 0x00 0x100>,
> + <0x7 0x0000000 0x1 0x0000000>;
<0x07 0x00000000 0x01 0x0000000>;
> + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
> + cdns,fifo-depth = <256>;
> + cdns,fifo-width = <4>;
> + cdns,trigger-address = <0x0>;
> + clocks = <&k3_clks 110 5>;
> + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + };
> };
More information about the linux-arm-kernel
mailing list