[PATCH v11 2/6] dt-bindings/thermal/mediatek: Add LVTS thermal controllers dt-binding definition

Balsam CHIHI bchihi at baylibre.com
Thu Jan 26 02:33:50 PST 2023


Hi Rob,

On Wed, Jan 25, 2023 at 9:34 PM Rob Herring <robh at kernel.org> wrote:
>
> On Tue, Jan 24, 2023 at 02:17:13PM +0100, bchihi at baylibre.com wrote:
> > From: Balsam CHIHI <bchihi at baylibre.com>
> >
>
> dt-bindings: thermal: ... for the subject

I will fix it.

>
> > Add LVTS thermal controllers dt-binding definition for mt8195.
> >
> > Signed-off-by: Balsam CHIHI <bchihi at baylibre.com>
> > ---
> >  .../thermal/mediatek,lvts-thermal.yaml        | 107 ++++++++++++++++++
> >  include/dt-bindings/thermal/mediatek-lvts.h   |  19 ++++
> >  2 files changed, 126 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
> >  create mode 100644 include/dt-bindings/thermal/mediatek-lvts.h
> >
> > diff --git a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
> > new file mode 100644
> > index 000000000000..12bfbdd8ff89
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
> > @@ -0,0 +1,107 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/thermal/mediatek,lvts-thermal.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MediaTek SoC Low Voltage Thermal Sensor (LVTS)
> > +
> > +maintainers:
> > +  - Balsam CHIHI <bchihi at baylibre.com>
> > +
> > +description: |
> > +  LVTS is a thermal management architecture composed of three subsystems,
> > +  a Sensing device - Thermal Sensing Micro Circuit Unit (TSMCU),
> > +  a Converter - Low Voltage Thermal Sensor converter (LVTS), and
> > +  a Digital controller (LVTS_CTRL).
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - mediatek,mt8195-lvts-ap
> > +      - mediatek,mt8195-lvts-mcu
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    maxItems: 1
> > +    description: LVTS reset for clearing temporary data on AP/MCU.
> > +
> > +  nvmem-cells:
> > +    minItems: 1
> > +    items:
> > +      - description: Calibration eFuse data 1 for LVTS
> > +      - description: Calibration eFuse data 2 for LVTS
> > +
> > +  nvmem-cell-names:
> > +    minItems: 1
> > +    items:
> > +      - const: lvts-calib-data-1
> > +      - const: lvts-calib-data-2
> > +
> > +  "#thermal-sensor-cells":
> > +    const: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - resets
> > +  - nvmem-cells
> > +  - nvmem-cell-names
> > +  - "#thermal-sensor-cells"
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/clock/mt8195-clk.h>
> > +    #include <dt-bindings/reset/mt8195-resets.h>
> > +    #include <dt-bindings/thermal/mediatek-lvts.h>
> > +
> > +    soc {
> > +      #address-cells = <2>;
> > +      #size-cells = <2>;
> > +
> > +      lvts_mcu: thermal-sensor at 11278000 {
> > +        compatible = "mediatek,mt8195-lvts-mcu";
> > +        reg = <0 0x11278000 0 0x1000>;
> > +        interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
> > +        clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
> > +        resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
> > +        nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
> > +        nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
> > +        #thermal-sensor-cells = <1>;
> > +      };
> > +    };
> > +
> > +    thermal_zones: thermal-zones {
> > +      cpu0-thermal {
> > +        polling-delay = <1000>;
> > +        polling-delay-passive = <250>;
> > +        thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU0>;
> > +
> > +        trips {
> > +          cpu0_alert: trip-alert {
> > +            temperature = <85000>;
> > +            hysteresis = <2000>;
> > +            type = "passive";
> > +          };
> > +
> > +          cpu0_crit: trip-crit {
> > +            temperature = <100000>;
> > +            hysteresis = <2000>;
> > +            type = "critical";
> > +          };
> > +        };
> > +      };
> > +    };
> > diff --git a/include/dt-bindings/thermal/mediatek-lvts.h b/include/dt-bindings/thermal/mediatek-lvts.h
> > new file mode 100644
> > index 000000000000..428a95c18509
> > --- /dev/null
> > +++ b/include/dt-bindings/thermal/mediatek-lvts.h
> > @@ -0,0 +1,19 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
>
> Okay with GPL 4? GPL-2.0-only
>
> Dual license please. Consistent with your .dts files.

I will fix this too.

>
> > +/*
> > + * Copyright (c) 2023 MediaTek Inc.
> > + * Author: Balsam CHIHI <bchihi at baylibre.com>
> > + */
> > +
> > +#ifndef __MEDIATEK_LVTS_DT_H
> > +#define __MEDIATEK_LVTS_DT_H
> > +
> > +#define MT8195_MCU_BIG_CPU0  0
> > +#define MT8195_MCU_BIG_CPU1  1
> > +#define MT8195_MCU_BIG_CPU2  2
> > +#define MT8195_MCU_BIG_CPU3  3
> > +#define MT8195_MCU_LITTLE_CPU0       4
> > +#define MT8195_MCU_LITTLE_CPU1       5
> > +#define MT8195_MCU_LITTLE_CPU2       6
> > +#define MT8195_MCU_LITTLE_CPU3       7
> > +
> > +#endif /* __MEDIATEK_LVTS_DT_H */
> > --
> > 2.34.1
> >

Thank you for the review.

Best regards,
Balsam



More information about the linux-arm-kernel mailing list