[PATCH 07/15] dt-bindings: clock: Add Ambarella clock bindings
Li Chen
me at linux.beauty
Wed Jan 25 04:06:31 PST 2023
On Wed, 25 Jan 2023 17:55:34 +0800,
Hi Krzysztof,
Krzysztof Kozlowski wrote:
>
> On 25/01/2023 10:28, Li Chen wrote:
> >
> > Hi Krzysztof,
> >
> > Sorry for my late reply.
> >
> > On Mon, 23 Jan 2023 16:11:08 +0800,
> > Krzysztof Kozlowski wrote:
> >>
> >> On 23/01/2023 08:32, Li Chen wrote:
> >>> This patch introduce clock bindings for Ambarella.
> >>>
> >>> Signed-off-by: Li Chen <lchen at ambarella.com>
> >>> Change-Id: I29018a23ed3a5b79a1103e859a5c7ed7bb83a261
> >>
> >> All the same problems plus new:
> >>
> >> Subject: drop second/last, redundant "bindings". The "dt-bindings"
> >> prefix is already stating that these are bindings.
> >
> > Well noted.
> >
> >>> ---
> >>> .../clock/ambarella,composite-clock.yaml | 52 ++++++++++++++++
> >>> .../bindings/clock/ambarella,pll-clock.yaml | 59 +++++++++++++++++++
> >>> MAINTAINERS | 2 +
> >>> 3 files changed, 113 insertions(+)
> >>> create mode 100644 Documentation/devicetree/bindings/clock/ambarella,composite-clock.yaml
> >>> create mode 100644 Documentation/devicetree/bindings/clock/ambarella,pll-clock.yaml
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/clock/ambarella,composite-clock.yaml b/Documentation/devicetree/bindings/clock/ambarella,composite-clock.yaml
> >>> new file mode 100644
> >>> index 000000000000..fac1cb9379c4
> >>> --- /dev/null
> >>> +++ b/Documentation/devicetree/bindings/clock/ambarella,composite-clock.yaml
> >>> @@ -0,0 +1,52 @@
> >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >>> +%YAML 1.2
> >>> +---
> >>> +$id: http://devicetree.org/schemas/clock/ambarella,composite-clock.yaml#
> >>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >>> +
> >>> +title: Ambarella Composite Clock
> >>> +
> >>> +maintainers:
> >>> + - Li Chen <lchen at ambarella.com>
> >>> +
> >>
> >> Missing description.
> >
> > Thanks, description as below will be added in v2:
> >
> > "Ambarella SoCs integrates some composite clocks, like uart0, which aggrate the functionality
> > of the basic clock types, like mux and div."
> >
> >>> +properties:
> >>> + compatible:
> >>> + items:
> >>
> >> Drop items.
> >
> > Ok.
> >
> >>> + - const: ambarella,composite-clock
> >>
> >> Missing SoC specific compatible. This is anyway not really correct
> >> compatible...
> >
> > Most Ambarella's compatibles don't contain SoC name, because we prefer
> > to use syscon + offsets in dts to tell driver the correct register offsets, or
> > ues struct soc_device and SoC identity stores in a given physical address.
>
> That's not correct hardware description. Drop the syscon and offsets.
Ok.
> >
> > So compatibles like "ambarella,composite-clock" and "ambarella,pinctrl" are
> > used widely in Ambarella kernels.
>
> What do you do downstream does not matter. You can invent any crazy idea
> and it is not an argument that it should be done like that. Usually
> downstream code is incorrect...
Yeah, I understand it.
I really hope to learn the standard/right ways and
I am very grateful for your careful reviews.
> > Feel free to correct me if you think this
> > is not a good idea.
>
> This is bad idea. Compatibles should be specific. Devices should not use
> syscons to poke other registers, unless strictly necessary, but have
> strictly defined MMIO address space and use it.
Ok, I will convert syscon-based regmaps to SoC-specific compatibles and of_device_id->data.
But I have three questions:
0. why syscon + offsets is a bad idea copared to specific compatibles?
1. when would it be a good idea to use syscon in device tree?
2. syscon VS reg, which is preferred in device tree?
Thanks in advanced.
> >
> >>> +
> >>> + clocks: true
> >>
> >> No, needs constraints.
> >
> > Ok. I will list all clocks name
> >
> >>> + assigned-clocks: true
> >>> + assigned-clock-parents: true
> >>> + assigned-clock-rates: true
> >>
> >> Drop these three.
> >
> > Ok
> >
> >>> + clock-output-names: true
> >>
> >> Missing constraints.
> >
> > Ok, I will add "maxItems: 1"
> >
> >>> + amb,mux-regmap: true
> >>
> >> NAK.
> >>
> >> It's enough. The patches have very, very poor quality.
> >>
> >> Missing description, missing type/$ref, wrong prefix.
> >
> > Sorry, I forget to run dt_binding_check, I will spend some
> > time learning the binding and check, sorry for it.
> >
> >>> + amb,div-regmap: true
> >>> + amb,div-width: true
> >>> + amb,div-shift: true
> >>
> >> These two are arguments to phandle.
> >
> > I will add description and $ref to regmap and width/shift.
>
> Drop all these syscon properties.
Ok, so I should replace these regmaps with reg, right?
> >
> >>> +
> >>> + '#clock-cells':
> >>> + const: 0
> >>> +
> >>> +required:
> >>> + - compatible
> >>> + - reg
> >>> + - clocks
> >>> + - '#clock-cells'
> >>> +
> >>> +additionalProperties: false
> >>
> >> So why you decided to add it here and not in other places?
> >
> > I didn't understand it well. I will add it to other places in v2,
> > thanks for pointint out it.
> >
> >>> +
> >>> +examples:
> >>> + - |
> >>> + gclk_uart0: gclk-uart0 {
> >>
> >> Wrong indentation.
> >
> > Well noted.
> >
> >>> + #clock-cells = <0>;
> >>> + compatible = "ambarella,composite-clock";
> >>> + clocks = <&osc>, <&gclk_core>, <&pll_out_enet>, <&pll_out_sd>;
> >>> + clock-output-names = "gclk_uart0";
> >>> + assigned-clocks = <&gclk_uart0>;
> >>> + assigned-clock-parents = <&osc>;
> >>> + assigned-clock-rates = <24000000>;
> >>> + amb,mux-regmap = <&rct_syscon 0x1c8>;
> >>> + amb,div-regmap = <&rct_syscon 0x038>;
> >>> + amb,div-width = <24>;
> >>> + amb,div-shift = <0>;
> >>> + };
> >>> diff --git a/Documentation/devicetree/bindings/clock/ambarella,pll-clock.yaml b/Documentation/devicetree/bindings/clock/ambarella,pll-clock.yaml
> >>> new file mode 100644
> >>> index 000000000000..65c1feb60041
> >>> --- /dev/null
> >>> +++ b/Documentation/devicetree/bindings/clock/ambarella,pll-clock.yaml
> >>> @@ -0,0 +1,59 @@
> >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >>> +%YAML 1.2
> >>> +---
> >>> +$id: http://devicetree.org/schemas/clock/ambarella,pll-clock.yaml#
> >>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >>> +
> >>> +title: Ambarella PLL Clock
> >>> +
> >>> +maintainers:
> >>> + - Li Chen <lchen at ambarella.com>
> >>> +
> >>> +properties:
> >>> + compatible:
> >>> + enum:
> >>> + - ambarella,pll-clock
> >>> + - ambarella,clkpll-v0
> >>> +
> >>> +if:
> >>
> >> No, this does not work like that. It sits under "allOf", located after
> >> "required:".
> >
> > Thanks, I will learn "allOf" and use it in v2. BTW, we use the two compatibles as below:
> > clocks {
> > compatible = "ambarella,clkpll-v0";
>
> Nope.
>
> > ...
> > gclk_core: gclk-core {
> > #clock-cells = <0>;
> > compatible = "ambarella,pll-clock";
>
> Also nope.
>
> > clocks = <&osc>;
> > clock-output-names = "gclk_core";
> > amb,clk-regmap = <&rct_syscon 0x000 0x004 0x100 0x104 0x000 0x000>;
>
> Nope, nope, nope.
>
> You need proper clock-controller with its own MMIO address space.
>
> > };
> > ...
> > }
> >
> > I'm not sure can I describe the two compatibles in this single yaml, can you give some advice? thanks!
>
> There are plenty of examples, including example-schema.
Ok, I will learn more and fix it.
Regards,
Li
More information about the linux-arm-kernel
mailing list