[PATCH v2 0/3] arm64: meson-g12b: add initial support for Odroid-N2L
Neil Armstrong
neil.armstrong at linaro.org
Wed Jan 25 00:18:36 PST 2023
ODROID-N2L is a variant SBC in small form factor and some peripherals
are removed from ODROID-N2PLUS based on S922X SoC.
- On-board ethernet is removed
- On-board RTC is removed
- USB 3.0 hub is removed, so one USB 2.0 and one USB 3.0 host ports
are available
- Huge heatsink is replaced with 40x40mm heatsink, 5V active heatsink
is recommended or a tall passive sink is optional
- 3.5mm earjack is removed
- IR remote receiver is removed
- MIPI DSI port is added
So achieve this the current odroid-n2 dtsi is moved as odroid.dtsi
and only the N2/N2+ changes are kept in the odroid-n2.
With this only a minimal changes are needed to support the Odroid-N2L.
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
Changes in v2:
- Fixed include and phy0 supply name on patch 3
- Added review tag on patch 1
- Link to v1: https://lore.kernel.org/r/20230122-topic-odroid-n2l-upstream-initial-v1-0-1ce5e08039d0@linaro.org
---
Neil Armstrong (3):
dt-bindings: arm: amlogic: document Odroid-N2L
arm64: dts: meson-g12b: move common node into new odroid.dtsi
arm64: dts: meson-g12b-odroid: Add initial support for Hardkernel ODROID-N2L
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 448 +--------------------
.../boot/dts/amlogic/meson-g12b-odroid-n2l.dts | 125 ++++++
arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi | 445 ++++++++++++++++++++
5 files changed, 581 insertions(+), 439 deletions(-)
---
base-commit: 1b929c02afd37871d5afb9d498426f83432e71c2
change-id: 20230122-topic-odroid-n2l-upstream-initial-8e4f741792c1
Best regards,
--
Neil Armstrong <neil.armstrong at linaro.org>
More information about the linux-arm-kernel
mailing list