[PATCH v2 03/14] ARM: dts: broadcom: bcmbca: Add spi controller node

[Krzysztof Kozlowski]

On 24/01/2023 23:12, William Zhang wrote:
> Add support for HSSPI controller in ARMv7 chip dts files.
> 
> Signed-off-by: William Zhang <william.zhang at broadcom.com>
> 
> ---
> 
> Changes in v2:
> - Update compatible string with SoC model number, controller version
>   info and bcmbca fall back name
> - Add interrupt property
> 
>  arch/arm/boot/dts/bcm47622.dtsi    | 19 +++++++++++++++++++
>  arch/arm/boot/dts/bcm63138.dtsi    | 19 +++++++++++++++++++
>  arch/arm/boot/dts/bcm63148.dtsi    | 19 +++++++++++++++++++
>  arch/arm/boot/dts/bcm63178.dtsi    | 20 ++++++++++++++++++++
>  arch/arm/boot/dts/bcm6756.dtsi     | 20 ++++++++++++++++++++
>  arch/arm/boot/dts/bcm6846.dtsi     | 19 +++++++++++++++++++
>  arch/arm/boot/dts/bcm6855.dtsi     | 20 ++++++++++++++++++++
>  arch/arm/boot/dts/bcm6878.dtsi     | 20 ++++++++++++++++++++
>  arch/arm/boot/dts/bcm947622.dts    |  4 ++++
>  arch/arm/boot/dts/bcm963138.dts    |  4 ++++
>  arch/arm/boot/dts/bcm963138dvt.dts |  4 ++++
>  arch/arm/boot/dts/bcm963148.dts    |  4 ++++
>  arch/arm/boot/dts/bcm963178.dts    |  4 ++++
>  arch/arm/boot/dts/bcm96756.dts     |  4 ++++
>  arch/arm/boot/dts/bcm96846.dts     |  4 ++++
>  arch/arm/boot/dts/bcm96855.dts     |  4 ++++
>  arch/arm/boot/dts/bcm96878.dts     |  4 ++++
>  17 files changed, 192 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi
> index f4b2db9bc4ab..6de4a2287c90 100644
> --- a/arch/arm/boot/dts/bcm47622.dtsi
> +++ b/arch/arm/boot/dts/bcm47622.dtsi
> @@ -88,6 +88,12 @@ uart_clk: uart-clk {
>  			clock-div = <4>;
>  			clock-mult = <1>;
>  		};
> +
> +		hsspi_pll: hsspi-pll {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <200000000>;
> +		};
>  	};
>  
>  	psci {
> @@ -119,6 +125,19 @@ bus at ff800000 {
>  		#size-cells = <1>;
>  		ranges = <0 0xff800000 0x800000>;
>  
> +		hsspi: spi at 1000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0",
> +						 "brcm,bcmbca-hsspi";

Several of your lines are not properly indented/aligned.

Best regards,
Krzysztof