[PATCH AUTOSEL 5.15 03/14] arm64: dts: freescale: Fix pca954x i2c-mux node names
Sasha Levin
sashal at kernel.org
Tue Jan 24 05:42:46 PST 2023
From: Geert Uytterhoeven <geert+renesas at glider.be>
[ Upstream commit b025b4f5c288e29bbea421613a5b4eacf9261fbb ]
"make dtbs_check":
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547 at 77: $nodename:0: 'pca9547 at 77' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547 at 77: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c at 4' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
Signed-off-by: Shawn Guo <shawnguo at kernel.org>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts | 2 +-
arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts | 4 ++--
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 2 +-
12 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index e22c5e77fecd..9615f3b9ee60 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -110,7 +110,7 @@ &esdhc1 {
&i2c0 {
status = "okay";
- pca9547 at 77 {
+ i2c-mux at 77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index fea167d222cf..14856bc79b22 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -70,7 +70,7 @@ fpga: board-control at 2,0 {
&i2c0 {
status = "okay";
- pca9547 at 77 {
+ i2c-mux at 77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index eec62c63dafe..9ee9928f71b4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -76,7 +76,7 @@ &duart1 {
&i2c0 {
status = "okay";
- pca9547 at 77 {
+ i2c-mux at 77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 41d8b15f25a5..aa52ff73ff9e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -53,7 +53,7 @@ flash at 2 {
&i2c0 {
status = "okay";
- i2c-switch at 77 {
+ i2c-mux at 77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 1bfbce69cc8b..ee8e932628d1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -136,7 +136,7 @@ mdio2_aquantia_phy: ethernet-phy at 0 {
&i2c0 {
status = "okay";
- i2c-switch at 77 {
+ i2c-mux at 77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index d3f03dcbb8c3..a9c6682a3955 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -245,7 +245,7 @@ rx8035: rtc at 32 {
&i2c3 {
status = "okay";
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9540";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index 10d2fe091965..8d96d18c3697 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -44,7 +44,7 @@ cpld at 3,0 {
&i2c0 {
status = "okay";
- pca9547 at 77 {
+ i2c-mux at 77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 4b71c4fcb35f..787e408da002 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -44,7 +44,7 @@ cpld at 3,0 {
&i2c0 {
status = "okay";
- pca9547 at 75 {
+ i2c-mux at 75 {
compatible = "nxp,pca9547";
reg = <0x75>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index afb455210bd0..d32a52ab00a4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -54,7 +54,7 @@ &esdhc1 {
&i2c0 {
status = "okay";
- i2c-switch at 77 {
+ i2c-mux at 77 {
compatible = "nxp,pca9547";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
index 74c09891600f..6357078185ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -214,7 +214,7 @@ &i2c3 {
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- i2cmux at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9540";
reg = <0x70>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index f70fb32b96b0..cf14ab5f7404 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -133,7 +133,7 @@ &i2c1 {
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- i2cmux at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_pca9546>;
@@ -216,7 +216,7 @@ &i2c4 {
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
- pca9546: i2cmux at 70 {
+ pca9546: i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 863232a47004..4497763d57cc 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -61,7 +61,7 @@ &i2c1 {
pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
status = "okay";
- i2c-switch at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9646", "nxp,pca9546";
#address-cells = <1>;
#size-cells = <0>;
--
2.39.0
More information about the linux-arm-kernel
mailing list