[PATCH v7 0/6] arm64: Permit EFI boot with MMU and caches on

[Catalin Marinas]

On Wed, 11 Jan 2023 11:22:30 +0100, Ard Biesheuvel wrote:
> The purpose of this series is to remove any explicit cache maintenance
> for coherency during early boot. Software managed coherency is error
> prone and tedious, and running with the MMU off is generally bad for
> performance, and it becomes unnecessary if we simply retain the
> cacheable 1:1 mapping of all of system RAM provided by EFI, and use it
> to populate the initial ID map page tables. After setting up this
> preliminary ID map, we disable the MMU, drop to EL1, reprogram the MAIR,
> TCR and SCTLR registers as before, and proceed as usual, avoiding the
> need for any manipulations of memory while the MMU and caches are off.
> 
> [...]

Applied to arm64 (for-next/efi-boot-mmu-on), thanks!

[1/6] arm64: head: Move all finalise_el2 calls to after __enable_mmu
      https://git.kernel.org/arm64/c/82e4958800c0
[2/6] arm64: kernel: move identity map out of .text mapping
      https://git.kernel.org/arm64/c/af7249b317e4
[3/6] arm64: head: record the MMU state at primary entry
      https://git.kernel.org/arm64/c/9d7c13e5dde3
[4/6] arm64: head: avoid cache invalidation when entering with the MMU on
      https://git.kernel.org/arm64/c/32b135a7fafe
[5/6] arm64: head: Clean the ID map and the HYP text to the PoC if needed
      https://git.kernel.org/arm64/c/3dcf60bbfd28
[6/6] efi: arm64: enter with MMU and caches enabled
      https://git.kernel.org/arm64/c/617861703830

-- 
Catalin