[PATCH v3 05/10] dt-bindings: soc: fsl: cpm_qe: Add QMC controller

[Krzysztof Kozlowski]

On 24/01/2023 10:42, Herve Codina wrote:
> Hi Krzysztof,
> 
> On Tue, 17 Jan 2023 12:31:09 +0100
> Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org> wrote:
> 
>> On 13/01/2023 11:37, Herve Codina wrote:
>>> Add support for the QMC (QUICC Multichannel Controller)
>>> available in some PowerQUICC SoC such as MPC885 or MPC866.
>>>
>>> Signed-off-by: Herve Codina <herve.codina at bootlin.com>
>>> ---
>>>  .../bindings/soc/fsl/cpm_qe/fsl,qmc.yaml      | 164 ++++++++++++++++++
>>>  1 file changed, 164 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qmc.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qmc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qmc.yaml
>>> new file mode 100644
>>> index 000000000000..3ec52f1635c8
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qmc.yaml
>>> @@ -0,0 +1,164 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qmc.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: PowerQUICC CPM QUICC Multichannel Controller (QMC)
>>> +
>>> +maintainers:
>>> +  - Herve Codina <herve.codina at bootlin.com>
>>> +
>>> +description: |
>>> +  The QMC (QUICC Multichannel Controller) emulates up to 64 channels within
>>> +  one serial controller using the same TDM physical interface routed from
>>> +  TSA.
>>> +
>>> +properties:
>>> +  compatible:
>>> +    items:
>>> +      - enum:
>>> +          - fsl,mpc885-scc-qmc
>>> +          - fsl,mpc866-scc-qmc
>>> +      - const: fsl,cpm1-scc-qmc
>>> +
>>> +  reg:
>>> +    items:
>>> +      - description: SCC (Serial communication controller) register base
>>> +      - description: SCC parameter ram base
>>> +      - description: Dual port ram base
>>> +
>>> +  reg-names:
>>> +    items:
>>> +      - const: scc_regs
>>> +      - const: scc_pram
>>> +      - const: dpram
>>> +
>>> +  interrupts:
>>> +    maxItems: 1
>>> +    description: SCC interrupt line in the CPM interrupt controller
>>> +
>>> +  fsl,tsa:
>>> +    $ref: /schemas/types.yaml#/definitions/phandle
>>> +    description: phandle to the TSA
>>> +
>>> +  fsl,tsa-cell-id:
>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>> +    enum: [1, 2, 3]
>>> +    description: |
>>> +      TSA cell ID (dt-bindings/soc/fsl,tsa.h defines these values)
>>> +       - 1: SCC2
>>> +       - 2: SCC3
>>> +       - 3: SCC4  
>>
>> Is this used as argument to tsa? If so, this should be part of fsl,tsa
>> property, just like we do for all syscon-like phandles.
> 
> Yes, indeed.
> I will move 'fsl,tsa' to 'fsl,tsa-cell' with 'fsl,tsa-cell' a phandle/number
> pair (the phandle to TSA node and the TSA cell id to use)

Move to fsl,tsa, not from.


Best regards,
Krzysztof