[PATCH] ARM: dts: cx92755: align UART node name with bindings

[Baruch Siach]

Hi Krzysztof,

On Mon, Jan 23 2023, Krzysztof Kozlowski wrote:
> Bindings expect UART/serial node names to be "serial".
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

Acked-by: Baruch Siach <baruch at tkos.co.il>

Thanks,
baruch

> ---
>  arch/arm/boot/dts/cx92755.dtsi | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi
> index d2e8f36f8c60..227675fbe820 100644
> --- a/arch/arm/boot/dts/cx92755.dtsi
> +++ b/arch/arm/boot/dts/cx92755.dtsi
> @@ -107,7 +107,7 @@ uc_regs: syscon at f00003a0 {
>  		reg = <0xf00003a0 0x10>;
>  	};
>  
> -	uart0: uart at f0000740 {
> +	uart0: serial at f0000740 {
>  		compatible = "cnxt,cx92755-usart";
>  		reg = <0xf0000740 0x20>;
>  		clocks = <&main_clk>;
> @@ -115,7 +115,7 @@ uart0: uart at f0000740 {
>  		status = "disabled";
>  	};
>  
> -	uart1: uart at f0000760 {
> +	uart1: serial at f0000760 {
>  		compatible = "cnxt,cx92755-usart";
>  		reg = <0xf0000760 0x20>;
>  		clocks = <&main_clk>;
> @@ -123,7 +123,7 @@ uart1: uart at f0000760 {
>  		status = "disabled";
>  	};
>  
> -	uart2: uart at f0000780 {
> +	uart2: serial at f0000780 {
>  		compatible = "cnxt,cx92755-usart";
>  		reg = <0xf0000780 0x20>;
>  		clocks = <&main_clk>;


-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -