[PATCH v8 1/3] arm64: dts: imx8mm-evk: move PMIC configuration
Johannes Schneider
johannes.schneider at leica-geosystems.com
Sun Jan 22 23:13:10 PST 2023
Move the PMIC configuration out of imx8mm-evk.dtsi into a separate
file; to accommodate devicetrees for the rev-b EVK, which comes with a
different PMIC.
Signed-off-by: Johannes Schneider <johannes.schneider at leica-geosystems.com>
---
.../boot/dts/freescale/imx8mm-ddr4-evk.dts | 1 +
.../dts/freescale/imx8mm-evk-rohm-pmic.dtsi | 118 ++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 1 +
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 112 -----------------
4 files changed, 120 insertions(+), 112 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-evk-rohm-pmic.dtsi
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
index 6c079c0a3a48..f39182ce65b4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "imx8mm-evk.dtsi"
+#include "imx8mm-evk-rohm-pmic.dtsi"
/ {
model = "FSL i.MX8MM DDR4 EVK with CYW43455 WIFI/BT board";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk-rohm-pmic.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk-rohm-pmic.dtsi
new file mode 100644
index 000000000000..0b056996a27b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk-rohm-pmic.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 NXP
+ */
+
+&i2c1 {
+ pmic at 4b {
+ compatible = "rohm,bd71847";
+ reg = <0x4b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ rohm,reset-snvs-powered;
+
+ #clock-cells = <0>;
+ clocks = <&osc_32k 0>;
+ clock-output-names = "clk-32k-out";
+
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <900000>;
+ };
+
+ buck3_reg: BUCK3 {
+ // BUCK5 in datasheet
+ regulator-name = "buck3";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ // BUCK6 in datasheet
+ regulator-name = "buck4";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5_reg: BUCK5 {
+ // BUCK7 in datasheet
+ regulator-name = "buck5";
+ regulator-min-microvolt = <1605000>;
+ regulator-max-microvolt = <1995000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6_reg: BUCK6 {
+ // BUCK8 in datasheet
+ regulator-name = "buck6";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index a2b24d4d4e3e..d2b6d7de7e53 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -7,6 +7,7 @@
#include <dt-bindings/usb/pd.h>
#include "imx8mm-evk.dtsi"
+#include "imx8mm-evk-rohm-pmic.dtsi"
/ {
model = "FSL i.MX8MM EVK board";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 7d6317d95b13..21d0614af44c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -182,118 +182,6 @@ &i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
-
- pmic at 4b {
- compatible = "rohm,bd71847";
- reg = <0x4b>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pmic>;
- interrupt-parent = <&gpio1>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
- rohm,reset-snvs-powered;
-
- #clock-cells = <0>;
- clocks = <&osc_32k 0>;
- clock-output-names = "clk-32k-out";
-
- regulators {
- buck1_reg: BUCK1 {
- regulator-name = "buck1";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1300000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <1250>;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "buck2";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1300000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <1250>;
- rohm,dvs-run-voltage = <1000000>;
- rohm,dvs-idle-voltage = <900000>;
- };
-
- buck3_reg: BUCK3 {
- // BUCK5 in datasheet
- regulator-name = "buck3";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1350000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck4_reg: BUCK4 {
- // BUCK6 in datasheet
- regulator-name = "buck4";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck5_reg: BUCK5 {
- // BUCK7 in datasheet
- regulator-name = "buck5";
- regulator-min-microvolt = <1605000>;
- regulator-max-microvolt = <1995000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck6_reg: BUCK6 {
- // BUCK8 in datasheet
- regulator-name = "buck6";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo1_reg: LDO1 {
- regulator-name = "ldo1";
- regulator-min-microvolt = <1600000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "ldo2";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <900000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "ldo3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "ldo4";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "ldo6";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
};
&i2c2 {
--
2.25.1
More information about the linux-arm-kernel
mailing list