[PATCH v9 02/15] dt-bindings: mmc: cdns: Add AMD Pensando Elba SoC

[Brad Larson]

On 19/01/2023 7:47 UTC, Krzysztof Kozlowski wrote:
>On 19/01/2023 04:51, Brad Larson wrote:
>> AMD Pensando Elba ARM 64-bit SoC is integrated with this IP and
>> explicitly controls byte-lane enables.
>> 
...
>> diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
>> index 8b1a0fdcb5e3..f7dd6f990f96 100644
>> --- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
>> +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
>> @@ -16,12 +16,14 @@ properties:
>>    compatible:
>>      items:
>>        - enum:
>> +          - amd,pensando-elba-sd4hc
>>            - microchip,mpfs-sd4hc
>>            - socionext,uniphier-sd4hc
>>        - const: cdns,sd4hc
>>  
>>    reg:
>> -    maxItems: 1
>> +    minItems: 1
>> +    maxItems: 2
>>  
>>    interrupts:
>>      maxItems: 1
>> @@ -111,12 +113,36 @@ properties:
>>      minimum: 0
>>      maximum: 0x7f
>>  
>> +  reset-names:
>> +    items:
>> +      - const: hw
>> +
>> +  resets:
>> +    description:
>> +      optional. phandle to the system reset controller with line index
>
>Drop "optional"
>Drop "phandle to the" and rephrase it to describe physical reset line.
>Don't describe here DT syntax (phandle) but the hardware. What is
>expected to be here?

Done, see the resulting diff below for full context.  The missing
'contains' was the bug.

>> +      for mmc hw reset line if exists.
>> +    maxItems: 1
>> +
>>  required:
>>    - compatible
>>    - reg
>>    - interrupts
>>    - clocks
>>  
>> +if:
>
>Move the allO from the top here and put it under it. Saves indentation soon.

Yes.

>> +  properties:
>> +    compatible:
>> +      const: amd,pensando-elba-sd4hc
>
>BTW, this probably won't even work and that's the answer why you added
>fake maxItems: 2... This should make you think about the bug. You must
>use contains.

That was the problem, see updated diff below.  Passes dtbs_check and dt_binding_check.

>> +then:
>> +  properties:
>> +    reg:
>> +      minItems: 2
>> +else:
>> +  properties:
>> +    reg:
>> +      minItems: 1
>> +      maxItems: 2
>
>No, why do you suddenly allow two items on all variants? This was not
>described in your commit msg at all, so I expect here maxItems: 1.

Set maxItems: 1.

>Also, unless your reset is applicable to all variants, resets: false and
>reset-names: false.

Added false for both, this is the diff with above changes

--- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
@@ -9,19 +9,18 @@ title: Cadence SD/SDIO/eMMC Host Controller (SD4HC)
 maintainers:
   - Masahiro Yamada <yamada.masahiro at socionext.com>
 
-allOf:
-  - $ref: mmc-controller.yaml
-
 properties:
   compatible:
     items:
       - enum:
+          - amd,pensando-elba-sd4hc
           - microchip,mpfs-sd4hc
           - socionext,uniphier-sd4hc
       - const: cdns,sd4hc
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   interrupts:
     maxItems: 1
@@ -111,12 +110,42 @@ properties:
     minimum: 0
     maximum: 0x7f
 
+  reset-names:
+    items:
+      - const: hw
+
+  resets:
+    description:
+      physical line number to hardware reset the mmc
+    maxItems: 1
+
 required:
   - compatible
   - reg
   - interrupts
   - clocks
 
+allOf:
+  - $ref: mmc-controller.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: amd,pensando-elba-sd4hc
+    then:
+      required:
+        - reset-names
+        - resets
+      properties:
+        reg:
+          minItems: 2
+    else:
+      properties:
+        reset-names: false
+        resets: false
+        reg:
+          maxItems: 1
+

Regards,
Brad