[PATCH v6 2/6] arm64: dts: Add i.MX8MM PCIe EP support on EVK board

[Krzysztof Kozlowski]

On 20/01/2023 06:25, Richard Zhu wrote:
> Add i.MX8MM PCIe EP support on EVK board.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> index 0ce3005d578d..9d65b70939fa 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> @@ -371,6 +371,19 @@ &pcie0 {
>  	status = "okay";
>  };
>  
> +&pcie0_ep{
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pcie0>;
> +	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
> +		 <&clk IMX8MM_CLK_PCIE1_AUX>;
> +	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
> +			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
> +	assigned-clock-rates = <10000000>, <250000000>;
> +	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
> +				 <&clk IMX8MM_SYS_PLL2_250M>;
> +	status = "disabled";

It's already disabled. What are you doing here? Having disabled node is
useless, so entire patch should be dropped.

Best regards,
Krzysztof