[PATCH v2 0/6] add VTM nodes to TI's K3 SoCs

[Bryan Brattlof]

Hello again everyone!

This patch series adds in basic VTM nodes for all of TI's K3 SoCs. As of
right now these do not do much other than add thermal entries into the
sysfs directory and power down the device once it's exceeded a critical
temperature.

Changes from v1:
- Fixed indexing of thermal nodes[0]

[0] https://lore.kernel.org/all/20230119221322.12563-1-bb@ti.com/

Thanks for reviewing!
~Bryan

Bryan Brattlof (6):
  arm64: dts: ti: k3-am64-main: add VTM node
  arm64: dts: ti: k3-am62-wakeup: add VTM node
  arm64: dts: ti: k3-j721e-mcu-wakeup: add VTM node
  arm64: dts: ti: k3-j721s2-mcu-wakeup: add VTM node
  arm64: dts: ti: k3-j7200-mcu-wakeup: add VTM node
  arm64: dts: ti: k3-am62a-wakeup: add VTM node

 arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi   |  33 ++++++
 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi    |   8 ++
 arch/arm64/boot/dts/ti/k3-am62.dtsi           |   6 +-
 arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi  |  47 ++++++++
 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi   |   8 ++
 arch/arm64/boot/dts/ti/k3-am62a.dtsi          |   2 +
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi      |   8 ++
 arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi   |  33 ++++++
 arch/arm64/boot/dts/ti/k3-am64.dtsi           |   3 +
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      |   8 ++
 arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi  |  47 ++++++++
 arch/arm64/boot/dts/ti/k3-j7200.dtsi          |   2 +
 .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |   9 ++
 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi  |  75 +++++++++++++
 arch/arm64/boot/dts/ti/k3-j721e.dtsi          |   2 +
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     |   8 ++
 arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi | 103 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721s2.dtsi         |   2 +
 18 files changed, 403 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi


base-commit: 1b929c02afd37871d5afb9d498426f83432e71c2
-- 
2.39.0