[PATCH 2/9] ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Thu Jan 19 09:03:14 PST 2023


On 19/01/2023 15:42, Alexander Stein wrote:
> Add device tree for the MBLS102xA mainboard with TQMLS1021A SoM.
> 
> Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
> ---
>  arch/arm/boot/dts/Makefile                    |   1 +
>  .../boot/dts/ls1021a-tqmls1021a-mbls1021a.dts | 409 ++++++++++++++++++
>  arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi     |  93 ++++
>  3 files changed, 503 insertions(+)
>  create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts
>  create mode 100644 arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index d0c07867aeabe..44b5ed44b13d6 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -802,6 +802,7 @@ dtb-$(CONFIG_SOC_LS1021A) += \
>  	ls1021a-iot.dtb \
>  	ls1021a-moxa-uc-8410a.dtb \
>  	ls1021a-qds.dtb \
> +	ls1021a-tqmls1021a-mbls1021a.dtb \
>  	ls1021a-tsn.dtb \
>  	ls1021a-twr.dtb
>  dtb-$(CONFIG_SOC_VF610) += \
> diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts
> new file mode 100644
> index 0000000000000..21da171b9f38e
> --- /dev/null
> +++ b/arch/arm/boot/dts/ls1021a-tqmls1021a-mbls1021a.dts
> @@ -0,0 +1,409 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
> +/*
> + * Copyright 2013-2014 Freescale Semiconductor, Inc.
> + * Copyright 2018-2023 TQ-Systems GmbH <linux at ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Alexander Stein
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/leds/leds-pca9532.h>
> +#include <dt-bindings/net/ti-dp83867.h>
> +#include "ls1021a-tqmls1021a.dtsi"
> +
> +/ {
> +	model = "TQMLS102xA SOM on MBLS102xA";
> +	compatible = "tq,ls1021a-tqmls1021a-mbls102xa", "tq,ls1021a-tqmls1021a", "fsl,ls1021a";
> +
> +	audio_mclk: audio-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +	};
> +
> +	backlight_dcu: backlight {
> +		compatible = "gpio-backlight";
> +		gpios = <&pca9530 0 GPIO_ACTIVE_LOW>;
> +		status = "disabled";
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		autorepeat;
> +
> +		switch-1 {
> +			label = "S6";
> +			linux,code = <BTN_0>;
> +			gpios = <&pca9554_0 0 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		btn2: switch-2 {
> +			label = "S7";
> +			linux,code = <BTN_1>;
> +			gpios = <&pca9554_0 1 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		switch-3 {
> +			label = "S8";
> +			linux,code = <BTN_2>;
> +			gpios = <&pca9554_0 2 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +
> +	gpio_leds: gpio-leds {
> +		compatible = "gpio-leds";
> +
> +		led-0 {
> +			color = <LED_COLOR_ID_GREEN>;
> +			function = LED_FUNCTION_STATUS;
> +			function-enumerator = <0>;
> +			gpios = <&pca9554_2 4 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "default-on";
> +		};
> +
> +		led-1 {
> +			color = <LED_COLOR_ID_GREEN>;
> +			function = LED_FUNCTION_STATUS;
> +			function-enumerator = <1>;
> +			gpios = <&pca9554_2 5 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "default-on";
> +		};
> +
> +		led-2 {
> +			color = <LED_COLOR_ID_GREEN>;
> +			function = LED_FUNCTION_STATUS;
> +			function-enumerator = <2>;
> +			gpios = <&pca9554_2 6 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "default-on";
> +		};
> +
> +		led-3 {
> +			color = <LED_COLOR_ID_GREEN>;
> +			function = LED_FUNCTION_HEARTBEAT;
> +			function-enumerator = <0>;
> +			gpios = <&pca9554_2 7 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	lvds_encoder: lvds-encoder {
> +		compatible = "ti,sn75lvds83", "lvds-encoder";
> +		power-supply = <&reg_3p3v>;
> +		status = "disabled";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port at 0 {
> +				reg = <0>;
> +
> +				lvds_encoder_in: endpoint {};
> +			};
> +
> +			port at 1 {
> +				reg = <1>;
> +
> +				lvds_encoder_out: endpoint {};
> +			};
> +		};
> +	};
> +
> +	reg_1p2v: regulator-1p2v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "1P2V";
> +		regulator-min-microvolt = <1200000>;
> +		regulator-max-microvolt = <1200000>;
> +		regulator-always-on;
> +		vin-supply = <&reg_3p3v>;
> +	};
> +
> +	reg_3p3v: regulator-3p3v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "3P3V";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +	};
> +
> +	hdmi_out: hdmi {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +		ddc-i2c-bus = <&i2c0>;
> +		status = "disabled";
> +
> +		port {
> +			hdmi_in: endpoint {
> +				remote-endpoint = <&sii9022a_out>;
> +			};
> +		};
> +	};
> +
> +	display: panel {
> +		backlight = <&backlight_dcu>;
> +		enable-gpios = <&pca9554_1 3 GPIO_ACTIVE_HIGH>;
> +		status = "disabled";
> +
> +		port {
> +			panel_in: endpoint {};
> +		};
> +	};
> +
> +	sound {
> +		compatible = "fsl,imx-audio-tlv320aic32x4";
> +		model = "ls1021a-mbls1021a-tlv320aic32";
> +		ssi-controller = <&sai1>;
> +		audio-codec = <&tlv320aic32x4>;
> +	};
> +
> +};
> +
> +&can0 {
> +	status = "okay";
> +	xceiver-supply = <&reg_3p3v>;
> +};
> +
> +&can1 {
> +	status = "okay";
> +	xceiver-supply = <&reg_3p3v>;
> +};
> +
> +&dspi0 {
> +	bus-num = <0>;
> +	status = "okay";
> +};
> +
> +&enet0 {
> +	phy-handle = <&rgmii_phy0c>;
> +	phy-mode = "rgmii-id";
> +	mac-address = [ 00 00 00 00 00 00 ];
> +	status = "okay";
> +};
> +
> +&enet1 {
> +	tbi-handle = <&tbi1>;
> +	phy-handle = <&sgmii_phy03>;
> +	phy-mode = "sgmii";
> +	mac-address = [ 00 00 00 00 00 00 ];
> +	status = "okay";
> +};
> +
> +&enet2 {
> +	phy-handle = <&rgmii_phy04>;
> +	phy-mode = "rgmii-id";
> +	mac-address = [ 00 00 00 00 00 00 ];
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +
> +	tlv320aic32x4: audio-codec at 18 {
> +		compatible = "ti,tlv320aic32x4";
> +		reg = <0x18>;
> +		clocks = <&audio_mclk>;
> +		clock-names = "mclk";
> +		ldoin-supply = <&reg_3p3v>;
> +		iov-supply = <&reg_3p3v>;
> +	};
> +
> +	pca9554_0: gpio-expander at 20 {
> +		compatible = "nxp,pca9554";
> +		reg = <0x20>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		vcc-supply = <&reg_3p3v>;
> +		gpio-line-names = "BUTTON0", "BUTTON1",
> +				  "BUTTON2", "EMMC_SEL",
> +				  "DIP2", "DIP3",
> +				  "EXT_TOUCH_INT", "GPIO_1";
> +	};
> +
> +	pca9554_1: gpio-expander at 21 {
> +		compatible = "nxp,pca9554";
> +		reg = <0x21>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		vcc-supply = <&reg_3p3v>;
> +		gpio-line-names = "PCIE_PWR_EN", "MPCIE_DISABLE#",
> +				  "MPCIE_WAKE#", "LCD_BLT_EN",
> +				  "LCD_PWR_EN", "EC1_PHY_PWDN",
> +				  "EC3_PHY_PWDN", "SGMII_PHY_PWDN";
> +	};
> +
> +	pca9554_2: gpio-expander at 22 {
> +		compatible = "nxp,pca9554";
> +		reg = <0x22>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-parent = <&extirq>;
> +		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		vcc-supply = <&reg_3p3v>;
> +		gpio-line-names = "MUX_SEL0", "MUX_SEL1",
> +				  "MUX_SEL2", "MUX_SEL3",
> +				  "V95", "V96", "V97", "V98";
> +	};
> +
> +	sii9022a: hdmi-transmitter at 3b {
> +		compatible = "sil,sii9022";
> +		reg = <0x3b>;
> +		iovcc-supply = <&reg_3p3v>;
> +		cvcc12-supply = <&reg_1p2v>;
> +		interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>;
> +		#sound-dai-cells = <0>;
> +		sil,i2s-data-lanes = <0>;
> +		status = "disabled";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port at 0 {
> +				reg = <0>;
> +
> +				sii9022a_in: endpoint {};
> +			};
> +
> +			port at 1 {
> +				reg = <1>;
> +
> +				sii9022a_out: endpoint {
> +					remote-endpoint = <&hdmi_in>;
> +				};
> +			};
> +		};
> +	};
> +
> +	stmpe811: touchscreen at 41 {
> +		compatible = "st,stmpe811";
> +		reg = <0x41>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
> +		vcc-supply = <&reg_3p3v>;
> +		vio-supply = <&reg_3p3v>;
> +		status = "okay";

Drop, why do you need it?

> +
> +		stmpe_gpio {

No underscores in node names, generic node names, so "gpio". Does
anything depend on odd naming?

> +			compatible = "st,stmpe-gpio";
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			/* GPIO 5-7 used for touch */
> +			st,norequest-mask = <0xf0>;
> +			gpio-line-names = "GPIO_ADC_I2C1_1",
> +					  "GPIO_ADC_I2C1_2",
> +					  "GPIO_ADC_I2C1_3",
> +					  "GPIO_ADC_I2C1_4";
> +		};
> +
> +		stmpe_touchscreen {

Same problems.

> +			compatible = "st,stmpe-ts";
> +			status = "disabled";
> +		};
> +	};
> +
> +	pca9530: leds at 60 {
> +		compatible = "nxp,pca9530";
> +		reg = <0x60>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		gpio-line-names = "PWM_0", "PWM_1";
> +
> +		gpio_pwm_0 {

No underscores in node names, generic node names. This is neither GPIO
nor PWM.

> +			label = "pca9530:pwm0";
> +			type = <PCA9532_TYPE_GPIO>;
> +		};
> +
> +		gpio_pwm_1 {
> +			label = "pca9530:pwm1";
> +			type = <PCA9532_TYPE_GPIO>;
> +		};
> +	};
> +
> +};
> +
> +&i2c1 {
> +	status = "okay";
> +};
> +
> +&lpuart0 {
> +	status = "okay";
> +	linux,rs485-enabled-at-boot-time;
> +};
> +
> +&mdio0 {
> +	sgmii_phy03: ethernet-phy at 3 {
> +		compatible = "ethernet-phy-ieee802.3-c22";
> +		reg = <0x03>;
> +		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> +		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
> +		ti,dp83867-rxctrl-strap-quirk;
> +	};
> +
> +	rgmii_phy04: ethernet-phy at 4 {
> +		compatible = "ethernet-phy-ieee802.3-c22";
> +		reg = <0x04>;
> +		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
> +		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> +		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> +		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
> +	};
> +
> +	rgmii_phy0c: ethernet-phy at c {
> +		compatible = "ethernet-phy-ieee802.3-c22";
> +		reg = <0x0c>;
> +		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
> +		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> +		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> +		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
> +	};
> +};
> +
> +&pwm6 {
> +	status = "okay";
> +};
> +
> +&pwm7 {
> +	status = "okay";
> +};
> +
> +&sai1 {
> +	status = "okay";
> +};
> +
> +&sata {
> +	/delete-property/ dma-coherent;
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&usb3 {
> +	/*
> +	 * Although DR connector, VBUS is always driven, so
> +	 * restrict to host mode.
> +	 */
> +	dr_mode = "host";
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
> new file mode 100644
> index 0000000000000..1ab518c489252
> --- /dev/null
> +++ b/arch/arm/boot/dts/ls1021a-tqmls1021a.dtsi
> @@ -0,0 +1,93 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
> +/*
> + * Copyright 2013-2014 Freescale Semiconductor, Inc.
> + * Copyright 2018-2023 TQ-Systems GmbH <linux at ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Alexander Stein
> + */
> +
> +#include "ls1021a.dtsi"
> +
> +/ {
> +	model = "TQMLS102xA SOM";
> +	compatible = "tq,ls1021a-tqmls1021a", "fsl,ls1021a";
> +
> +	reg_3p3v_som: regulator-3p3v-som {
> +		compatible = "regulator-fixed";
> +		regulator-name = "3P3V_SOM";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +	};
> +};
> +
> +&esdhc {
> +	compatible = "fsl,esdhc", "fsl,ls1021a-esdhc";
> +	/* e-MMC over 8 data lines */
> +	bus-width = <8>;
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +
> +	mc34vr500: pmic at 8 {
> +		reg = <0x08>;

No compatible? What's this?

> +		status = "disabled";
> +	};
> +
> +	pmc0: pmc at 11 {

No compatible? What's this?

> +		reg = <0x11>;
> +		status = "disabled";
> +	};
> +
> +	sa56004: temperature-sensor at 4c {
> +		compatible = "nxp,sa56004";
> +		reg = <0x4c>;
> +		vcc-supply = <&reg_3p3v_som>;
> +	};
> +
> +	adm1069: supervisor at 4f {

No compatible? What's this?

> +		reg = <0x4f>;
> +		status = "disabled";
> +	};
> +
> +	rtc0: rtc at 51 {
> +		compatible = "nxp,pcf85063a";
> +		quartz-load-femtofarads = <12500>;
> +		reg = <0x51>;

Reg is second property

> +	};
> +
> +	m24c64_54: eeprom at 54 {
> +		compatible = "atmel,24c64";
> +		reg = <0x54>;
> +		pagesize = <32>;
> +		read-only;
> +		vcc-supply = <&reg_3p3v_som>;
> +	};
> +};
Best regards,
Krzysztof




More information about the linux-arm-kernel mailing list