[PATCH v7 1/3] arm64: dts: imx8mm-evk: move PMIC configuration

[Marco Felsch]

Hi Ahamd,

On 23-01-19, Ahmad Fatoum wrote:
> Hello Marco,
> 
> On 19.01.23 10:51, Marco Felsch wrote:
> > Do we really need to move it into another dtsi file? I would either
> > suggest to move the pmic description into the .dts file since it is not
> > common anymore. This way we can avoid the imx8mm-evk-rohm-pmic.dtsi.
> 
> The PMIC DTSIs were my suggestion. The Rohm PMIC is still common between
> old LPDDR4 EVK and DDR4 EVK.

Ah okay but still it is one indirection more while reading the dts file.
Therefore I would prefer to put it into the dts file or keep it in the
dtsi file and delete the node within the imx8mm-evkb.dts file. But this
is just my opinion.

Regards,
  Marco


> 
> Cheers,
> Ahmad
> 
> > 
> > Regards,
> >   Marco
> > 
> >>  / {
> >>  	model = "FSL i.MX8MM DDR4 EVK with CYW43455 WIFI/BT board";
> >> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk-rohm-pmic.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk-rohm-pmic.dtsi
> >> new file mode 100644
> >> index 000000000000..0b056996a27b
> >> --- /dev/null
> >> +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk-rohm-pmic.dtsi
> >> @@ -0,0 +1,118 @@
> >> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> >> +/*
> >> + * Copyright 2020 NXP
> >> + */
> >> +
> >> +&i2c1 {
> >> +	pmic at 4b {
> >> +		compatible = "rohm,bd71847";
> >> +		reg = <0x4b>;
> >> +		pinctrl-names = "default";
> >> +		pinctrl-0 = <&pinctrl_pmic>;
> >> +		interrupt-parent = <&gpio1>;
> >> +		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> >> +		rohm,reset-snvs-powered;
> >> +
> >> +		#clock-cells = <0>;
> >> +		clocks = <&osc_32k 0>;
> >> +		clock-output-names = "clk-32k-out";
> >> +
> >> +		regulators {
> >> +			buck1_reg: BUCK1 {
> >> +				regulator-name = "buck1";
> >> +				regulator-min-microvolt = <700000>;
> >> +				regulator-max-microvolt = <1300000>;
> >> +				regulator-boot-on;
> >> +				regulator-always-on;
> >> +				regulator-ramp-delay = <1250>;
> >> +			};
> >> +
> >> +			buck2_reg: BUCK2 {
> >> +				regulator-name = "buck2";
> >> +				regulator-min-microvolt = <700000>;
> >> +				regulator-max-microvolt = <1300000>;
> >> +				regulator-boot-on;
> >> +				regulator-always-on;
> >> +				regulator-ramp-delay = <1250>;
> >> +				rohm,dvs-run-voltage = <1000000>;
> >> +				rohm,dvs-idle-voltage = <900000>;
> >> +			};
> >> +
> >> +			buck3_reg: BUCK3 {
> >> +				// BUCK5 in datasheet
> >> +				regulator-name = "buck3";
> >> +				regulator-min-microvolt = <700000>;
> >> +				regulator-max-microvolt = <1350000>;
> >> +				regulator-boot-on;
> >> +				regulator-always-on;
> >> +			};
> >> +
> >> +			buck4_reg: BUCK4 {
> >> +				// BUCK6 in datasheet
> >> +				regulator-name = "buck4";
> >> +				regulator-min-microvolt = <3000000>;
> >> +				regulator-max-microvolt = <3300000>;
> >> +				regulator-boot-on;
> >> +				regulator-always-on;
> >> +			};
> >> +
> >> +			buck5_reg: BUCK5 {
> >> +				// BUCK7 in datasheet
> >> +				regulator-name = "buck5";
> >> +				regulator-min-microvolt = <1605000>;
> >> +				regulator-max-microvolt = <1995000>;
> >> +				regulator-boot-on;
> >> +				regulator-always-on;
> >> +			};
> >> +
> >> +			buck6_reg: BUCK6 {
> >> +				// BUCK8 in datasheet
> >> +				regulator-name = "buck6";
> >> +				regulator-min-microvolt = <800000>;
> >> +				regulator-max-microvolt = <1400000>;
> >> +				regulator-boot-on;
> >> +				regulator-always-on;
> >> +			};
> >> +
> >> +			ldo1_reg: LDO1 {
> >> +				regulator-name = "ldo1";
> >> +				regulator-min-microvolt = <1600000>;
> >> +				regulator-max-microvolt = <3300000>;
> >> +				regulator-boot-on;
> >> +				regulator-always-on;
> >> +			};
> >> +
> >> +			ldo2_reg: LDO2 {
> >> +				regulator-name = "ldo2";
> >> +				regulator-min-microvolt = <800000>;
> >> +				regulator-max-microvolt = <900000>;
> >> +				regulator-boot-on;
> >> +				regulator-always-on;
> >> +			};
> >> +
> >> +			ldo3_reg: LDO3 {
> >> +				regulator-name = "ldo3";
> >> +				regulator-min-microvolt = <1800000>;
> >> +				regulator-max-microvolt = <3300000>;
> >> +				regulator-boot-on;
> >> +				regulator-always-on;
> >> +			};
> >> +
> >> +			ldo4_reg: LDO4 {
> >> +				regulator-name = "ldo4";
> >> +				regulator-min-microvolt = <900000>;
> >> +				regulator-max-microvolt = <1800000>;
> >> +				regulator-boot-on;
> >> +				regulator-always-on;
> >> +			};
> >> +
> >> +			ldo6_reg: LDO6 {
> >> +				regulator-name = "ldo6";
> >> +				regulator-min-microvolt = <900000>;
> >> +				regulator-max-microvolt = <1800000>;
> >> +				regulator-boot-on;
> >> +				regulator-always-on;
> >> +			};
> >> +		};
> >> +	};
> >> +};
> >> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> >> index a2b24d4d4e3e..d2b6d7de7e53 100644
> >> --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> >> +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> >> @@ -7,6 +7,7 @@
> >>  
> >>  #include <dt-bindings/usb/pd.h>
> >>  #include "imx8mm-evk.dtsi"
> >> +#include "imx8mm-evk-rohm-pmic.dtsi"
> >>  
> >>  / {
> >>  	model = "FSL i.MX8MM EVK board";
> >> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> >> index 7d6317d95b13..21d0614af44c 100644
> >> --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> >> +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> >> @@ -182,118 +182,6 @@ &i2c1 {
> >>  	pinctrl-names = "default";
> >>  	pinctrl-0 = <&pinctrl_i2c1>;
> >>  	status = "okay";
> >> -
> >> -	pmic at 4b {
> >> -		compatible = "rohm,bd71847";
> >> -		reg = <0x4b>;
> >> -		pinctrl-names = "default";
> >> -		pinctrl-0 = <&pinctrl_pmic>;
> >> -		interrupt-parent = <&gpio1>;
> >> -		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> >> -		rohm,reset-snvs-powered;
> >> -
> >> -		#clock-cells = <0>;
> >> -		clocks = <&osc_32k 0>;
> >> -		clock-output-names = "clk-32k-out";
> >> -
> >> -		regulators {
> >> -			buck1_reg: BUCK1 {
> >> -				regulator-name = "buck1";
> >> -				regulator-min-microvolt = <700000>;
> >> -				regulator-max-microvolt = <1300000>;
> >> -				regulator-boot-on;
> >> -				regulator-always-on;
> >> -				regulator-ramp-delay = <1250>;
> >> -			};
> >> -
> >> -			buck2_reg: BUCK2 {
> >> -				regulator-name = "buck2";
> >> -				regulator-min-microvolt = <700000>;
> >> -				regulator-max-microvolt = <1300000>;
> >> -				regulator-boot-on;
> >> -				regulator-always-on;
> >> -				regulator-ramp-delay = <1250>;
> >> -				rohm,dvs-run-voltage = <1000000>;
> >> -				rohm,dvs-idle-voltage = <900000>;
> >> -			};
> >> -
> >> -			buck3_reg: BUCK3 {
> >> -				// BUCK5 in datasheet
> >> -				regulator-name = "buck3";
> >> -				regulator-min-microvolt = <700000>;
> >> -				regulator-max-microvolt = <1350000>;
> >> -				regulator-boot-on;
> >> -				regulator-always-on;
> >> -			};
> >> -
> >> -			buck4_reg: BUCK4 {
> >> -				// BUCK6 in datasheet
> >> -				regulator-name = "buck4";
> >> -				regulator-min-microvolt = <3000000>;
> >> -				regulator-max-microvolt = <3300000>;
> >> -				regulator-boot-on;
> >> -				regulator-always-on;
> >> -			};
> >> -
> >> -			buck5_reg: BUCK5 {
> >> -				// BUCK7 in datasheet
> >> -				regulator-name = "buck5";
> >> -				regulator-min-microvolt = <1605000>;
> >> -				regulator-max-microvolt = <1995000>;
> >> -				regulator-boot-on;
> >> -				regulator-always-on;
> >> -			};
> >> -
> >> -			buck6_reg: BUCK6 {
> >> -				// BUCK8 in datasheet
> >> -				regulator-name = "buck6";
> >> -				regulator-min-microvolt = <800000>;
> >> -				regulator-max-microvolt = <1400000>;
> >> -				regulator-boot-on;
> >> -				regulator-always-on;
> >> -			};
> >> -
> >> -			ldo1_reg: LDO1 {
> >> -				regulator-name = "ldo1";
> >> -				regulator-min-microvolt = <1600000>;
> >> -				regulator-max-microvolt = <3300000>;
> >> -				regulator-boot-on;
> >> -				regulator-always-on;
> >> -			};
> >> -
> >> -			ldo2_reg: LDO2 {
> >> -				regulator-name = "ldo2";
> >> -				regulator-min-microvolt = <800000>;
> >> -				regulator-max-microvolt = <900000>;
> >> -				regulator-boot-on;
> >> -				regulator-always-on;
> >> -			};
> >> -
> >> -			ldo3_reg: LDO3 {
> >> -				regulator-name = "ldo3";
> >> -				regulator-min-microvolt = <1800000>;
> >> -				regulator-max-microvolt = <3300000>;
> >> -				regulator-boot-on;
> >> -				regulator-always-on;
> >> -			};
> >> -
> >> -			ldo4_reg: LDO4 {
> >> -				regulator-name = "ldo4";
> >> -				regulator-min-microvolt = <900000>;
> >> -				regulator-max-microvolt = <1800000>;
> >> -				regulator-boot-on;
> >> -				regulator-always-on;
> >> -			};
> >> -
> >> -			ldo6_reg: LDO6 {
> >> -				regulator-name = "ldo6";
> >> -				regulator-min-microvolt = <900000>;
> >> -				regulator-max-microvolt = <1800000>;
> >> -				regulator-boot-on;
> >> -				regulator-always-on;
> >> -			};
> >> -		};
> >> -	};
> >>  };
> >>  
> >>  &i2c2 {
> >> -- 
> >> 2.25.1
> >>
> >>
> >>
> > 
> > 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 
>