[PATCH] usb: mtu3: fix the failure of qmu stop

[Chunfeng Yun]

This happens when do stress test of uvc stream on/off which will
enable/disable endpoints. uvc has four tx requests, and may disable
endpoint between queue tx requests as following:
    enable ep --> start qmu
    queue tx request0
    queue tx request1
    queue tx request2 --> resume qmu
    disable ep --> stop qmu may fail [1]
    queue tx request3 --> will resume qmu, may cause qmu can't work
                          when enable ep next time [2]

[1]: when the tx fifo has some data to transmit, and
    try to stop qmu (stop ep) meanwhile resume qmu (queue tx request),
    it may cause stop qmu timeout, then can be fixed by flushing fifo
    when stop qmu.
[2]: it resumes qmu again, shall stop qmu again.

Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
Reported-by: Min Guo <min.guo at mediatek.com>
---
 drivers/usb/mtu3/mtu3_gadget.c  | 3 +--
 drivers/usb/mtu3/mtu3_hw_regs.h | 1 +
 drivers/usb/mtu3/mtu3_qmu.c     | 7 +++++++
 3 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c
index 80236e7b0895..c0264d5426bf 100644
--- a/drivers/usb/mtu3/mtu3_gadget.c
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -133,10 +133,9 @@ static int mtu3_ep_disable(struct mtu3_ep *mep)
 {
 	struct mtu3 *mtu = mep->mtu;
 
-	mtu3_qmu_stop(mep);
-
 	/* abort all pending requests */
 	nuke(mep, -ESHUTDOWN);
+	mtu3_qmu_stop(mep);
 	mtu3_deconfig_ep(mtu, mep);
 	mtu3_gpd_ring_free(mep);
 
diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h
index 519a58301f45..ee30ae0a4b54 100644
--- a/drivers/usb/mtu3/mtu3_hw_regs.h
+++ b/drivers/usb/mtu3/mtu3_hw_regs.h
@@ -128,6 +128,7 @@
 #define TX_FIFOEMPTY		BIT(24)
 #define TX_SENTSTALL		BIT(22)
 #define TX_SENDSTALL		BIT(21)
+#define TX_FLUSHFIFO		BIT(20)
 #define TX_TXPKTRDY		BIT(16)
 #define TX_TXMAXPKTSZ_MSK	GENMASK(10, 0)
 #define TX_TXMAXPKTSZ(x)	((x) & TX_TXMAXPKTSZ_MSK)
diff --git a/drivers/usb/mtu3/mtu3_qmu.c b/drivers/usb/mtu3/mtu3_qmu.c
index 2ea3157ddb6e..a2fdab8b63b2 100644
--- a/drivers/usb/mtu3/mtu3_qmu.c
+++ b/drivers/usb/mtu3/mtu3_qmu.c
@@ -388,6 +388,9 @@ void mtu3_qmu_stop(struct mtu3_ep *mep)
 	}
 	mtu3_writel(mbase, qcsr, QMU_Q_STOP);
 
+	if (mep->is_in)
+		mtu3_setbits(mbase, MU3D_EP_TXCR0(epnum), TX_FLUSHFIFO);
+
 	ret = readl_poll_timeout_atomic(mbase + qcsr, value,
 			!(value & QMU_Q_ACTIVE), 1, 1000);
 	if (ret) {
@@ -395,6 +398,10 @@ void mtu3_qmu_stop(struct mtu3_ep *mep)
 		return;
 	}
 
+	/* flush fifo again to make sure the fifo is empty */
+	if (mep->is_in)
+		mtu3_setbits(mbase, MU3D_EP_TXCR0(epnum), TX_FLUSHFIFO);
+
 	dev_dbg(mtu->dev, "%s's qmu stop now!\n", mep->name);
 }
 
-- 
2.18.0