[PATCH 0/3] arm64: dts: Add IOT2050 M.2 board, describe QSPI layout

[Jan Kiszka]

This adds the devices tree for a new variant of the IOT2050 which comes
with two M.2 slots and is otherwise almost equivalent to the existing
Advanced PG2 variant (USB3 is available via M.2 now).

Furthermore, the device tree of the whole device series is extended to
also hold the QSPI layout.

Jan

Jan Kiszka (2):
  arm64: dts: ti: iot2050: Add layout of OSPI flash
  dt-bindings: arm: ti: Add binding for Siemens IOT2050 M.2 variant

chao zeng (1):
  arm64: dts: ti: iot2050: Add support for M.2 variant

 .../devicetree/bindings/arm/ti/k3.yaml        |   1 +
 arch/arm64/boot/dts/ti/Makefile               |   3 +
 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   |  46 +++++++
 .../dts/ti/k3-am6548-iot2050-advanced-m2.dts  | 122 ++++++++++++++++++
 4 files changed, 172 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts

-- 
2.35.3