[PATCH v5 00/11] ARM: suniv: USB and two new boards support

[Andre Przywara]

On Wed, 11 Jan 2023 01:53:21 +0000
Andre Przywara <andre.przywara at arm.com> wrote:

Hi,

> this is mostly a rebase of the former v4 series.
> It is based on top of v6.2-rc1, and builds cleanly there. For passing
> make dtbs_check, the PHY binding patch, part of a separate series[1], is
> needed. For USB functionality, patch 2/3 from there is needed as well.

This series has now been taken by Vinod and is available in linux-next
since at least Friday.

> I put a tree with both series combined here:
> https://github.com/apritzel/linux/commits/f1c100s-usb-v5
> 
> There were no changes to the actual patches, this is just a resend since
> the series missed the previous merge window.

Is there anything I can do to move this series forward? If I see this
correctly, this just misses a review of patch v5 03/11 "usb: musb: sunxi:
Introduce config struct". I addressed Jernej's comments on this already in v4.

Cheers,
Andre

> [1] https://lore.kernel.org/linux-phy/20230109012223.4079299-1-andre.przywara@arm.com/
> 
> ================
> This patchset introduces support for F1C100s' USB, and the SourceParts
> PopStick and Lctech Pi boards.
> 
> The DT binding and driver support for SUNIV USB MUSB device are added, in
> addition to DT changes to the DTSI and Lichee Nano DT. New DTs are added
> for the SourceParts PopStick v1.1 and Lctech Pi boards.
> 
> Changelog v4 ... v5:
> - Rebase on top to v6.2-rc1
> 
> Changelog v3 ... v4:
> - Dropped the PHY patches, they go via a different tree and need a
>   different base
> - rebased on top of linux-sunxi/sunxi/for-next (provides H616 USB)
> - musb DT binding: use enum
> - musb cleanup: use musb_hdrc_config config pointer directly
> - musb cleanup: use const where possible
> - drop partitions from Popstick DTS file
> - clarify Popstick has a USB type-A *plug*
> - add tags
> 
> Changelog v2 ... v3:
> - remove redundant "Device Tree Bindings" suffix in DT binding doc title
> - add BSD license to binding doc file (as per checkpatch)
> - fix some commit message title prefixes
> - use proper plural spelling for usb0_id_det-gpios
> - popstick.dts: Reorder otg_sram node reference alphabetically
> - popstick.dts: Add regulator- prefix to 3.3V regulator node name
> - popstick.dts: Fix status, compatible and reg property order
> - popstick.dts: Drop unneeded mmc0 and spi0 aliases
> - add patch to clean up sunxi MUSB driver
> - add Acks and Reviewed-by's
> 
> Changelog v1 ... v2:
> - USB PHY binding: clarify the relation with other phy-sun4i-usb bindings
> - Add Popstick binding and .dts patches
> 
> 
> Andre Przywara (4):
>   usb: musb: sunxi: Introduce config struct
>   dt-bindings: vendor-prefixes: add Lctech name
>   dt-bindings: arm: sunxi: add compatible strings for Lctech Pi
>   ARM: dts: suniv: Add Lctech Pi F1C200s devicetree
> 
> Icenowy Zheng (7):
>   dt-bindings: usb: sunxi-musb: add F1C100s MUSB compatible string
>   usb: musb: sunxi: add support for the F1C100s MUSB controller
>   ARM: dts: suniv: add USB-related device nodes
>   ARM: dts: suniv: licheepi-nano: enable USB
>   dt-bindings: vendor-prefixes: add Source Parts
>   dt-binding: arm: sunxi: add compatible strings for PopStick v1.1
>   ARM: dts: suniv: add device tree for PopStick v1.1
> 
>  .../devicetree/bindings/arm/sunxi.yaml        | 13 +++
>  .../usb/allwinner,sun4i-a10-musb.yaml         | 10 +-
>  .../devicetree/bindings/vendor-prefixes.yaml  |  4 +
>  arch/arm/boot/dts/Makefile                    |  4 +-
>  .../boot/dts/suniv-f1c100s-licheepi-nano.dts  | 16 +++
>  arch/arm/boot/dts/suniv-f1c100s.dtsi          | 32 ++++++
>  arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts | 76 ++++++++++++++
>  .../boot/dts/suniv-f1c200s-popstick-v1.1.dts  | 81 +++++++++++++++
>  drivers/usb/musb/sunxi.c                      | 99 +++++++++++++------
>  9 files changed, 301 insertions(+), 34 deletions(-)
>  create mode 100644 arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts
>  create mode 100644 arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts
> 
> 
> base-commit: 1b929c02afd37871d5afb9d498426f83432e71c2
> prerequisite-patch-id: 7734c0032dcc073e59f0217ee47ff023f0b47bcf